10650203992 Kenmore Refrigerator - Instructions

Watched video on Part Select, ordered part,it arrived in three days installed same fifteen minutes had ice within one hour.Saved $300.00.Thanks Part Select.

After I ordered the parts, which was very easy to do using this website I read the other comments in reference to this repair. I am in agreement with anyone that said patience is important! The repair went about as expected, the only thing I had to do different was, after I assembled the door, it would not activate. I checked the microswitches for the ice dispenser and found that the arm on the glass bracket was not hitting the switches. I shaved off part of the horn on the back of the arm and that solved the problem!

This repair was super easy. there are only 5 screws to remove to get at the defective switch. 3 in the housing where the light bulbs are and 2 in the front trim piece where the cooling adjustment dials are. I never did unplug the fridge ,but probably should have although nothing bad happened. I removed all 5 screws using a 1/4" socket ( a nutdriver would work well also). there is also a small dia rod that comes down from the coolness adj. wheel that when you re-assemble goes though the middle of the wheel. The switch has only 2 wires that clip on with the push on flat type connectors. Very simple. I removed the wires and then the switch can be removed( it is only held in by 2 squeezable side clips). I put the new switch in and connected the wires , checked to see that the lights went on and off. which they did. then just put the screws back in.....done. also I would like to say that when I ordered my switch it came super fast. I ordered it online at 11:00am on a tuesday and it was on my doorstep in wisconsin by 10:00 am the next day...Thanks

I knew my ice maker was still working and I could hear that the switch on my water was still making the usual noise when tripped, so I knew that it had to be the inlet valve. I googled some videos and luckily found PartSelect.com. I used there diagnostics, looking at the percentages of other parts used to fix like problems. The part install was very easy as all I had to do was turn off the water and unplug the frig, remove the part, cut the input line and both output lines. Then slide those into the new part, with quick connects you just slide them in, the old part had compression fittings. Reattach the new part turn on the water, plug it back up, watch for leaks, your done..pretty sweet.

Did troubleshooting as manuel indicated. Had same problem once before. The replacement did the trick.

I watched the video provided on your website and followed the directives. It was just as easy and simple as noted in the video.

It was nice to see that the replacement auger was made out of metal, I have a great sense of safety now. The part fit perfectly and works better than it did before!!! Thanks for the quick delivery and a better part. I give you guys 5 stars. Did I mention the price was right also!!!

This is a very easy fix. Begin by emptying the contents of the door. Then, just remove hinge cap and remove the three hinge screws. The door can then be lifted off the hinge pin and placed on its side. Once this is done, replace the two can pieces (one on the door and one on the frame). Then just lift the door back in place and secure the hinge. This job can be done by one person (maybe two if you need help place the door on a work surface) and will take just 15 minutes.

The small arm in the tray for the ice maker stopped moving. I put hot water in there to see if anything was clogging up the line or the tray, but nothing was. I then pushed on the arm and it moved pretty easily. So I took off the front cover and the motor; I saw that the plastic piece connecting to the gear was broken. So I realigned and replaced the motor. Ice maker is working like a champ again.

Replaced the output nozzle and hose that goes through the door and down under the frig.Wasnt sure if I could push new hose down through door so hooked the two hoses together so I could pull the new hose into place. To hook them together i took a short screw, cut off the head and screwed it into both hoses and put one wrap of tape around it. Pulled through the first time.

Took out the door bins, 1 bolt on the plastic cap, 3 bolts on the hinge, took the door off, replaced cam at the bottom, all same size bolts, reset the door spent longer time cleaning the door selfs all done by my self in less than 30 min. others said it helped to have second pair of hands "my wife would of just got in the way :)"

Pulled off front. Detached wires without getting electrocuted. Marked them first so I'd know where they go. Pushed up the thing with wires so I could see the flap door. It had a heat thing in the flap which my replacement part didn't have, so I had to pull it out of the broken flap and insert in the new flap. Snapped flap door in place. Attached black thing loop to white thing. DIdn't use the spring or the white thing. Reattached wires and put on front piece. Everything now works. No more frost in the freezer!!!

i wasn't sure if this piece would fix my problem until i got into it and the tabs on that side if the bracket were broke preventing the control arm from accuating the dispenser.did as the video described. took the time to do some cleaning while i had the face plate off. i am recommending partselect to all my family and friends. i would quess this saved me $150 on a repair call!

I followed the instructions in the package, after having viewed the video (from PartSelect, but you have to go to youtube for it.) Replacing the valve got the cold water flowing but there still is no water going to the ice maker.

Made the order which came in a timely fashion. But the new pan was cracked. I immediagely called. The agent was friendly, personable, and helpful. She ordered a new pan, but it didn't come as it was supposed too. Yesterday I went to the barn and , yep, it was there! Why fedx put it there I don't know. But it is in good shape. Only complaint it that I have to keep the other part for 30 days to wait for notification whether they want it back or not! Otherwise very glad to have this issue solved.