10644023600 Kenmore Refrigerator - Instructions

We had cleaned the electronic eyes off several times which yielded one or two days of ice production. Since we could tell the ice maker was receiving water and producing ice we went ahead and replaced the controller. Now the ice maker is working like a champ. The instructions were easy to follow and the part was delivered quickly. Unplugged the fridge. Three screws on opposite sides of the freezer, plug in the emitter and receiver boards and replace the screws. Plug the fridge back in and away it went.

Simply done !

Called an appliance repair service, they wanted $326.69. Went on line, ordered the part, it came in 2 days. It took me 20 minutes to remove and reinstall the part. The sound of the cubes dumping into the bin was great. Thanks for your how to do it video. Oh by the way, I am a 68 year old handy woman!

I removed ice maker from mounting rack but left wiring connected. Checked power between N & L: 120V (OK). Shorted T & H: no harvest cycle. Shorted L & V: no water came out to fill tray. Shorted H & N: heater did not turn on. Also noted that LED on right Electronic Control Board would flash 2X, then pause, then 2X, then pause, regardless of flapper position on left Control Board. Replaced Icemaker Control Assembly first (also purchased replacement Control Boards). Icemaker started working. Noticed that original Control Boards still worked the same way (LED flashing regardless of flapper position) BUT ONLY IN CERTAIN STAGE OF CONTROL BOARD CYCLE. At other times in cycle, LED would turn steady on when flapper closed, and right after tray fills with new water, LED does not light at all. Apparently this is NORMAL. I ended up not replacing old Electronic Control Boards. Icemaker took 3 days to totally refill ice bin - I presume this is also normal.

online PartSelect had instructions for replacing icemaker. I gave them my part # and they sent me the correct replacement. following their instructions I was able to install the replacement in 30 minutes or less. PartSelect is a good company to deal with.

I order the suspect part before pulling out the ice tray and whole ice maker for inspection. As it turns out my ice tray was peeling and all gunked up and I needed a new one. I suggest in the case of ice maker issues that you pull the entire ice maker before ordering what appears to be the troubled part. I had to replace the whole ice maker which was not really that much more money than just the part.

I called in a repairman, who wasn't sure what the problem was but suggested it "might" be the electronic control boards. He charged me $55 for the service call, which I initially thought was reasonable. Then I found your website purely accidentally. I watched the video several times and read all of the comments posted. I then decided I would wait to see what the repairman would quote me for the part and the additional labor charge. He told me the part was $125. and the additional service charge was another $75. I decided to order the part, which arrived in 2 days. I am a woman who has never repaired anything on my own, but I decided to take a chance with this. It took me about 20 to 30 minutes to install both parts and within a few hours the first ice cubes fell. I was so proud of myself and very pleased that I found your website. The price of the part was reasonable, the video was very straightforward and all of the comments were extremely helpful. Thank you.