Husqvarna Chainsaw Seals and Gaskets
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Husqvarna Chainsaw Seals and Gaskets
Your Price
$6.25
In Stock
Husqvarna Chainsaw O-ring
PartSelect Number PS9287967
Manufacturer Part Number 537184901
This O-ring is a genuine OEM replacement part designed for use in a variety of power tools. It is a rubber seal used to prevent pressure loss, as well as oil, fuel, and air leakage from the fuel hose. It can be found on either end of the hose. You will need to replace this ring if it has lost elasticity, or if it is cracked or deformed. The O-ring can fail due to age, exposure to heat and chemicals, pressure buildup, or poor installation. A faulty ring will result in leakages, pressure loss, and decreased equipment performance. Carefully pry the old O-ring off the hose. Remove any dirt or debris in the area and lubricate the new ring before placing it in position. Apply light pressure to the ring until it is secure and sitting snugly. Note that your equipment may have several O-rings, therefore, inspect all of them as each ring is sold individually.
Your Price
$29.87
In Stock
Husqvarna Chainsaw Walbro Gasket/diaphragm Kit
PartSelect Number PS9285128
Manufacturer Part Number 530069844
This is an authentic OEM replacement kit for use with lawn and garden equipment. Each kit includes the carburetor, cylinder, crankcase, and muffler gaskets. The carburetor gasket seals the area between the carburetor and engine block to prevent the entry of contaminants into the carburetor. The crankcase gasket prevents oil from leaking out of the crankcase. The cylinder and muffler gaskets prevent the combustion and exhaust gases from escaping. If you are experiencing common problems such as leaking, loss of compression, and poor engine performance this indicates that your gaskets may be worn down or damaged and need replacement. Carefully remove the old gaskets and thoroughly clean the mating surfaces where the new gaskets will be installed to ensure a good seal. Install the new gaskets and ensure that they fit properly.
Your Price
$17.92
In Stock
Husqvarna Chainsaw Gasket Set
PartSelect Number PS12628951
Manufacturer Part Number 530071894
This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with chainsaws. The gaskets are used to seal connections to allow fuel to flow to the engine freely and to prevent leaks. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. The kit is sold complete and the kits are priced individually.
Your Price
$11.92
In Stock
Husqvarna Chainsaw Assembly Main Bearing & Seal
PartSelect Number PS9004779
Manufacturer Part Number 530056363
This is an authentic part assembled by original manufacturer. It fits various models of Poulan chainsaws. Ball bearings lessen friction between moving parts. They also hold and stabilize parts\' position and angle. Bearings are high wear pieces and can need replacement often. Included is one (1) bearing and one (1) seal.
Your Price
$7.45
In Stock
Husqvarna Chainsaw Gasket
PartSelect Number PS8990819
Manufacturer Part Number 503862501
This authentic OEM exhaust gasket is the seal between the heat deflector and the guard of your chainsaw cylinder, preventing hot exhaust gases from escaping and directing them away from the engine. It is usually found around the exhaust port on the cylinder. However, over time, the gasket can wear out, crack, or become damaged due to exposure to high temperatures and vibrations, leading to exhaust leaks. When this happens, you may notice increased noise or visible smoke around the cylinder area. To replace the exhaust gasket, start by removing the plastic cylinder cover and then take off the muffler by removing its supporting bolts. After that, you can replace the worn-out gasket with the new one. Please note that this replacement part is sold individually and that your chainsaw uses multiple gaskets, so it is crucial to ensure you purchase the correct one for your specific repair needs.
Your Price
$17.92
In Stock
Husqvarna Chainsaw Seal Ring
PartSelect Number PS9283215
Manufacturer Part Number 505275719
It is an authentic replacement part that is supplied by original equipment manufacturer. This is one of the seal rings for Husqvarna chainsaws, for correct location please make sure to check appropriate diagram of your model for correct location and use of this item. It is made of durable, high-quality metal and it is sold individually.
Your Price
$7.45
In Stock
Husqvarna Chainsaw Carburetor Gasket
PartSelect Number PS9002508
Manufacturer Part Number 530019172
This replacement carburetor gasket is specially made for use with gas chainsaws. It is supplied directly from original equipment manufacturer. This gasket provides an air tight seal between the carburetor and the plate. It is made out of compound material and it is sold individually. You will need a screwdriver and a wrench to complete this repair.
Your Price
$29.87
In Stock
Your Price
$6.25
In Stock
Your Price
$8.26
Special Order
Husqvarna Chainsaw O-ring
PartSelect Number PS9282651
Manufacturer Part Number 503263017
It is a high quality item that is specially designed for use with Husqvarna chainsaws. It is an authentic part that is sourced from original equipment manufacturer. This replacement o-ring is used to provide an air tight seal for the oil and the fuel tank caps. Please note one durable rubber o-ring is included per order.
Related Husqvarna Chainsaw Parts
- Husqvarna Chainsaw Bearings
- Husqvarna Chainsaw Brackets and Flanges
- Husqvarna Chainsaw Caps and Lids
- Husqvarna Chainsaw Carburetors
- Husqvarna Chainsaw Deflectors and Chutes
- Husqvarna Chainsaw Engines
- Husqvarna Chainsaw Exhausts
- Husqvarna Chainsaw Filters
- Husqvarna Chainsaw Handles
- Husqvarna Chainsaw Hardware
- Husqvarna Chainsaw Hoses and Tubes
- Husqvarna Chainsaw Knobs
- Husqvarna Chainsaw Pulleys
- Husqvarna Chainsaw Pumps
- Husqvarna Chainsaw Springs and Shock Absorbers
- Husqvarna Chainsaw Starters
- Husqvarna Chainsaw Switches
- Husqvarna Chainsaw Tanks and Containers
- Husqvarna Chainsaw Transmissions and Clutches
- Husqvarna Chainsaw Valves
- Husqvarna Chainsaw Wheels and Rollers
- Husqvarna Chainsaw Wire Plugs and Connectors