Hoover Refrigerator Seals and Gaskets
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Hoover Refrigerator Seals and Gaskets
Your Price
$169.96
In Stock
Hoover Refrigerator Fresh Food Door Gasket
PartSelect Number PS11743190
Manufacturer Part Number WP61004010
This white gasket is used to seal the door when closed to keep the cool air inside and the room air out.
Fixes these symptoms
- Door Sweating
- Fridge runs too long
- Fridge too warm
- See more...
Installation Instructions
Todd from Collegeville, PA
Refrigerator door weatherstripping torn
Removed all screws on the door that retained weatherstripping, removed weatherstripping and inside of door. Inserted new weatherstripping, lined up inside of door and loosely re-installed screws. After minor alignment adjusting, went back and tightened all screws. Replacement part was a perfect fit.
Read more...
Your Price
$137.93
In Stock
Hoover Refrigerator Freezer Door Gasket
PartSelect Number PS11743187
Manufacturer Part Number WP61004007
This freezer door gasket is designed to create a secure seal around the door, helping maintain consistent internal temperatures and prevent warm air from entering. By keeping cold air contained, it supports efficient cooling and reduces energy consumption. If you notice frost buildup, temperature fluctuations, or your appliance working harder than usual, replacing the gasket may restore proper performance. Installation requires basic tools and should be done with the unit unplugged.
Fixes these symptoms
- Door Sweating
- See more...
Installation Instructions
Randy from NEWPORT, PA
Replace old leaking freezer gasket with new one
Repair went very well with removal of old gasket and the new replacement. The replacement fit (OEM ?) did not fit as nice as the old one. Two screw holes at opposite corners never lined up with holes in new gasket. Some of the gasket inner folds did not fit nicely but they work with no issues.
Read more...
Your Price
$166.77
In Stock
Hoover Refrigerator Freezer Door Gasket
PartSelect Number PS11743189
Manufacturer Part Number WP61004009
This door gasket is used to seal the freezer door when closed.
Fixes these symptoms
- Door Sweating
- See more...
Installation Instructions
Maurice from ATLANTA, GA
The freezer was icing and the refrigerator was running constantly
I took the freezer door off. Gasket screws ran on the four side of the door. I unscrewed the top and three sides but the bottom screws were completely rusted and stuck. As the refrigerator was almost 19 years old which is the predicted lifespan I decided to just buy a new refrigerator. I was able to adjust the old gasket and got the freezer working normally but decided to go ahead with the replacement.
Read more...
Your Price
$167.47
In Stock
Hoover Refrigerator Fresh Food Door Gasket
A power screwdriver is absolutely essential. Read more...
PartSelect Number PS11743181
Manufacturer Part Number WP61003997
This white door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.
Fixes these symptoms
- Door Sweating
- Fridge runs too long
- Fridge too warm
- See more...
Installation Instructions
Dennis from Houston, TX
gasket was not sealing everywhere
After unloading the door We took it off and laid it on the island. WE were then able to take all of the screws out without the door falling apart. Starting at the top we removed the old gasket and put on the new. The gasket was somewhat distorted but the hair dryer helped soften and shape it. We then put the door back on and used the hair dryer to shape any problems . This took right at one hour.A power screwdriver is absolutely essential. Read more...
Your Price
$165.54
Special Order
Hoover Refrigerator Fresh Food Door Gasket
PartSelect Number PS11743182
Manufacturer Part Number WP61003998
This white fresh food door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.
Your Price
$157.46
In Stock
Hoover Refrigerator Freezer Door Seal
PartSelect Number PS11743191
Manufacturer Part Number WP61004011
Introducing the Freezer Door Seal, a genuine Whirlpool part, designed to fit perfectly on select models of Whirlpool refrigerators. This uniquely designed seal creates a secure shield around your freezer door, preventing warm air from seeping into the freezer compartment, ensuring efficient operation and optimal temperature retention. For a pristine install, soak the seal in warm water or soften it with a hair dryer on low heat to naturally iron out any creases or folds. Please remember to safely store any perishable food items during installation as the door must be kept open throughout this procedure. Perfect for maintaining the efficiency of your Whirlpool refrigerator, this Freezer Door Seal keeps your freezer compartment securely sealed and cold air locked in. Rely only on genuine Whirlpool parts for maintaining the longevity and performance of your appliance.
Installation Instructions
Jeff from Crownsville, MD
Old seals around doors were leaking cool air.
Easy as could be. Unscrew the bolts on the inside of the seal, take off the old seal, place new seal on and screw back in. Saved myself $150 by doing it myself. So easy, my 7 year old could have done it.
Read more...
Your Price
$165.54
In Stock
Hoover Refrigerator Food Door Gasket (measures 30-3/4" By 39')
PartSelect Number PS11743835
Manufacturer Part Number WP70048-3
This white fresh food door gasket measures approximately 30-3/4 inches by 39 inches. It is used on many fresh food doors of top mount model refrigerators that have been manufactured since 1980.
Fixes these symptoms
- Door Sweating
- See more...
Installation Instructions
Joel from Upper Arlington, OH
failure to seal fridge doors adequately.
The doors had many hex screws. Using the correct socket size was critical. Empty the door shelves first. The screws had to come out because the new seal had slot holes for them to go between. Take off half of the screws from the top and sides and partially remove the old seal. Attach the new seal and do the same with the bottom half. With the new seal on the lower door it at first looks like a poor seal. Gently press the door and hold it for about 5 min. Then the seal is ok. The door can then can be open and shut gently with a good seal. With a good set of sockets the work can go faster than the time given.
Read more...
Your Price
$11.77
Special Order
Your Price
$164.51
Special Order
Hoover Refrigerator Fresh Food Door Gasket - Black
PartSelect Number PS11743257
Manufacturer Part Number WP61005944
Installation Instructions
Michael from Hilton Head Island, SC
Refrigerator door seal leaking and the beer was not getting cold.
Removed the inner door panel held on by 30 small nuts crews. Removed the old seal. Stretched new door seal onto inner door panel. Attached inner door panel and seal to inside of refrigerator door. Using a magnetic nut driver was the answer in the tight spots and the small nut screws. Everything works fine and the beer is cold again!
Read more...
No Longer Available
Hoover Refrigerator Food Door Gasket (measures 28-1/4" By 36-5/8")
2. Remove bottom hinge from door. Make sure door is supported. Shoulder works nicely for that. 3 hex head screws
3. Drop door down and off. Lay on table.
4. Remove inside door panel. The hex head screws require a 1/4" socket, and there are a lot of them, concealed under a flap of the gasket. Lift off and clean inside door panel.
5. The old gasket peels off. The new one goes on the same way. Place the inside door panel back on the door, and install the screws at the corners first. Make sure that they go thru the holes in the gasket.
6. Lift the door into position. Install the hinge, holding the door. Once it is tight, you are done. Read more...
PartSelect Number PS11743833
Manufacturer Part Number WP70048-1
This white fresh food door gasket measures approximately 28-1/4 inches by 36-5/8 inches. It is used on many fresh food doors of top mount model efrigerators that have been manufactured since 1980.
Installation Instructions
Gilbert from Water View, VA
Old gasket was ripped, damaged
1. Remove food from door2. Remove bottom hinge from door. Make sure door is supported. Shoulder works nicely for that. 3 hex head screws
3. Drop door down and off. Lay on table.
4. Remove inside door panel. The hex head screws require a 1/4" socket, and there are a lot of them, concealed under a flap of the gasket. Lift off and clean inside door panel.
5. The old gasket peels off. The new one goes on the same way. Place the inside door panel back on the door, and install the screws at the corners first. Make sure that they go thru the holes in the gasket.
6. Lift the door into position. Install the hinge, holding the door. Once it is tight, you are done. Read more...