Cub Cadet Vacuum Parts

Grommet,Fuel Tank – Part Number: 92071-2142

Your Price

$5.13

Cub Cadet Vacuum Grommet,Fuel Tank

★★★★★

2 Reviews

PartSelect Number PS9156129

Manufacturer Part Number 92071-2142

The Fuel Tank Grommet is a 1-inch, black, rubber part. It attaches to the fuel tank so you can run your fuel lines through it, and is rated as "Easy" to install by most of our customers. If worn or damaged, it will begin to leak fuel, and must be replaced. Refer to your make, model and diagrams to ensure you're choosing the right part.

Cap-Assembly-Tank – Part Number: 51048-2078

Your Price

$7.95

Cub Cadet Vacuum Cap-Assembly-Tank

★★★★★

2 Reviews

PartSelect Number PS8998548

Manufacturer Part Number 51048-2078

The Fuel Cap Assembly, is a black, plastic cap that keeps fuel inside the tank, and debris out. If broken, fuel will begin leaking out and it must be replaced. Installation is rated as "Easy", the part simply attaches on top of the fuel tank. Refer to your make, model, and diagram to ensure this is the correct part.

Your Price

$4.99

Cub Cadet Vacuum Air Filter

PartSelect Number PS10014105

Manufacturer Part Number 791-181757

This is a foam air filter designed for use within various models of outdoor power equipment like trimmers and leaf blowers. This foam filter measures approximately 3-inches in length and fits within the air filter assembly to prevent contaminants from entering your equipment. Air filters commonly build up with dust and dirt over time, and will need to be replaced every so often, and regularly inspecting them for build ups can reduce the amount of extra maintenance that is required. If your air filter is clogged, it will lead to worse performance from your equipment, like difficulty starting or not starting at all, and can even damage the carburetor and engine. To replace the air filter, remove the cover for the air filter housing, and remove and dispose of the old filter. Rub a small amount of oil into the new filter before installing it and securing the air filter cover.

Fl-Wash. (Hardened) – Part Number: 736-0187

Your Price

$4.99

Cub Cadet Vacuum Fl-Wash. (Hardened)

PartSelect Number PS10006526

Manufacturer Part Number 736-0187

This Flat Washer is made of durable gold-colored metal and is an authentic OEM part. It is used to spread the load under a bolt or nut and is sold individually. This part will need to be replaced if you notice any signs of cupping, corrosion, or other damage. Customers rate this repair as Easy.

Carburetor O-Ring – Part Number: 753-06185

Your Price

$3.99

Cub Cadet Vacuum Carburetor O-Ring

PartSelect Number PS10009589

Manufacturer Part Number 753-06185

Installation Instructions

William from PALMETTO, FL

Carburetor replacement

Removed 2 screws securing the air cleaner and carburetor to the engine using a T25 Torx driver. then removed the throttle cable from the carb.Then removed the o ring gasket from the engine and replaced with a new one and replaced the carb etc. Primed it and fired it up.Runs just like new. Read more...

Insulator O-Ring – Part Number: 753-06184

Your Price

$3.99

Cub Cadet Vacuum Insulator O-Ring

PartSelect Number PS9120832

Manufacturer Part Number 753-06184

Insulator Assembly (includes 22 & 23) – Part Number: 753-06189

Your Price

$7.26

Cub Cadet Vacuum Insulator Assembly (includes 22 & 23)

PartSelect Number PS9120833

Manufacturer Part Number 753-06189

This is an OEM insulator assembly that is used to protect the carburetor from engine heat and features various seals and hardware made of plastic, steel and rubber. It fits in between the carburetor and cylinder to prevent excessive heat from affecting the performance and operation of the carburetor. It is recommended that you use protective gloves, a screwdriver, and other tools for the replacement process, so check your model for what tools you will need for installation.

Your Price

$9.23

Cub Cadet Vacuum Exhaust Gasket

PartSelect Number PS9303530

Manufacturer Part Number 753-04619

Your Price

$15.11

Cub Cadet Vacuum Breather

★★★★★

1 Review

PartSelect Number PS9891389

Manufacturer Part Number 14069-0013

The Breather allows air to enter the tank, so no vacuum is created as the fuel level drops, which would prevent the flow of fuel to the carburetor.It seals in the gas emissions and fuel at the same time. It is a metal and rubber part, sold individually, rated as "Easy" to install. If damaged, fuel may start leaking from it, and it must be replaced. The part is attached inside of the fuel cap. Refer to your make, model and diagrams to ensure you're choosing the right part.