Cub Cadet Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Cub Cadet Parts
Your Price
$4.99
In Stock
Cub Cadet Plug-Spark
Removed air intake and filter
Loosened and disconnected gas line to carburetor
Unscrewed carburetor and disconnected from throttle arm
Reversed process using new carburetor, O-ring and gasket Read more...
PartSelect Number PS9140427
Manufacturer Part Number 796112S
This part is the replacement spark plug for your engine. It measures approximately 2.5 inches by 1 inch. The spark plug creates the spark that ignites fuel in your engine during the combustion process. Over time, spark plugs can become worn and can go bad, which will prevent the engine from firing. You can test your spark plug for continuity with a multimeter, and inspect it for corrosion if you suspect the spark plug has gone bad. This is an OEM part sourced directly from the manufacturer and it is sold individually.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
David from KNOXVILLE, TN
Replace carburetor
Loosened engine cover and moved out of the wayRemoved air intake and filter
Loosened and disconnected gas line to carburetor
Unscrewed carburetor and disconnected from throttle arm
Reversed process using new carburetor, O-ring and gasket Read more...
Your Price
$17.96
In Stock
Cub Cadet Carburetor Overhaul Kit
Would be nice to have a fuel line kit with the big fuel line (tank to carb) and the little one (carb to engine) together with all the necessary clamps. Read more...
PartSelect Number PS8984098
Manufacturer Part Number 498260
This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of reasons. When your carb becomes clogged, it is often a good idea to take it apart and replace the various parts inside by purchasing a carburetor kit. This is a 15-piece set and contains everything that you will need to do a total overhaul of your carburetor. You may want to purchase some carb cleaner as well, to ensure that the new pieces in the carb kit fit and adhere properly.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Jonathan from LIBERTY TWP, OH
Smelled Gas Leaks
Inspected/removed fuel lines and found signs of leak. Removed and inspected carburetor and found that seals and gaskets were toast. Replaced said seals with ones from the kit that fit and replaced fuel lines.Would be nice to have a fuel line kit with the big fuel line (tank to carb) and the little one (carb to engine) together with all the necessary clamps. Read more...
Your Price
$5.34
In Stock
Cub Cadet Grommet
PartSelect Number PS9064851
Manufacturer Part Number 692187
This grommet is an OEM part that is a 45-degree elbow for the crankcase breather tube of your mower engine. That is why it is also known as a 45-degree breather tube.
The part is made of rubber and is black in color. You must purchase this part individually. Your grommet may require replacing if you notice dark smoke coming out of the exhaust. This is a telltale sign that your grommet has become cracked and damaged. Other symptoms are a reduction in the mower performance, or a backfiring engine. According to our customers, this is an easy repair.
It requires no tools. Simply attach the grommet to the breather tube from the crankcase to the carburetor.
Your Price
$3.99
In Stock
Cub Cadet Diaphragm-Carburetor
PartSelect Number PS8937201
Manufacturer Part Number 270026
This is a carburetor diaphragm, which is an OEM part that pumps fuel from the tank to the engine. It is roughly 1x2 inches and black in color. Sold individually, this part can fail due to fatigue and wear, and if it is broken you may notice your engine is running rough or not starting. If your engine exhibits these signs of being starved of fuel, your diaphragm is damaged and needs to be replaced.
Our customers found this repair to be of medium difficulty. It requires a wrench, screwdriver, and pliers to complete. You will be able to locate your diaphragm inside the carburetor itself to swap it out with your new one.
Installation Instructions
Gerald from MAULDIN, SC
Replace fuel diaphragm, fuel pickup tube and air cleaner
This 5hp B&G was manufactured in 1985! Had been garage kept and always dependable. After 10 years of non use the carb wasn't getting gas. Removed air cleaner box, muffler and crankcase breather to easily remove carb, replace parts and reassemble.
Read more...
Your Price
$20.99
In Stock
Cub Cadet Fuel Tank Assembly W/Fuel Lines Incl. 29
PartSelect Number PS11812933
Manufacturer Part Number 753-06797
The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.
Your Price
$3.99
In Stock
Cub Cadet Shear Pin, .25
PartSelect Number PS9110822
Manufacturer Part Number 738-04124A
This individually sold shear pin is an OEM replacement that is most typically used in snowblowers but can also be used within snowblower attachments for lawn tractors. Its main uses are connecting the auger and auger shaft, which are the rotating blades, and to protect more valuable components such as the transmission.If the snow is causing excessive force or there is a jam within the auger and connected housing,it will cause the shear pin to snap, effectively stopping the rotation of the auger, while the auger shaft and gears will continue turning. If the shear pin snaps, snow will simply build up on the outside of the auger housing, since the auger will no longer spin. This shear pin has a .25-inch diameter, and 1.5-inch length and is sold individually. Most augers have a pin on each side, so you may need to purchase more than one, and it is also recommended that you carry spare pins in case of a future breakage.
Your Price
$37.15
In Stock
Your Price
$5.34
In Stock
Cub Cadet Grommet
PartSelect Number PS9294797
Manufacturer Part Number 692189
This OEM grommet, also called a 90-degree breather tube, is sold individually. Black in color and made of rubber, this is a 90-degree elbow for the crankcase breather tube of your mower engine. If you notice a reduction in the mower engine performance, and engine backfires, this part is likely to be in need of replacing. It can develop cracks due to fatigue, and our troubleshooting tip is to inspect this part if dark smoke is coming out of the exhaust, it is a telltale sign.
This is an easy repair to make, and does not require any tools. The new grommet attaches on the breather tube fromt he crankcase to the carburetor.
Your Price
$33.18
On Order
Cub Cadet Rear Axle Assembly
PartSelect Number PS10023414
Manufacturer Part Number 911-04144B
Axle assembly attaches the rear wheels to the mower and allows the wheels to rotate.
This part replaces part numbers 911-04144 and 911-04144A.
Wear work gloves to protect your hands when installing this part.
Your Price
$6.91
In Stock
Cub Cadet Kit-Needle/Seat
PartSelect Number PS8963322
Manufacturer Part Number 398188
This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle and seat work together to make sure that the valve opens and closes properly, so that it does not leak or overflow. If it is broken, you may notice a strong odor of fuel coming from your machine. Your engine may also run poorly or not start at all. A damaged or corroded float valve can cause fuel leaks, which can be dangerous as they are flammable. To remove the float valve, first disconnect the spark plug wire on your machine. You then need to consult your user manual to locate the float bowl of your machine and remove the bolts or screws securing their cover in place. When you lift off the cover, you will find the needle attached to the float. Using a pair of needle-nose pliers, grasp onto the needle and pull it out of the float. Keep in mind when you are purchasing this OEM-manufactured kit that it comes with the needle and seat together, but the float itself is not included.
Fixes these symptoms
- Will Not Start
- See more...
Related Cub Cadet Parts
- Cub Cadet Blower Parts
- Cub Cadet Chipper Shredder Parts
- Cub Cadet Edger Parts
- Cub Cadet Lawn Mower Parts
- Cub Cadet Lawn Tractor Accessories Parts
- Cub Cadet Lawn Tractor Parts
- Cub Cadet Log Splitter Parts
- Cub Cadet Small Engine Parts
- Cub Cadet Snow Blower Parts
- Cub Cadet Sprayer Parts
- Cub Cadet String Trimmer Parts
- Cub Cadet Tiller Parts
- Cub Cadet Vacuum Parts
Popular Cub Cadet Models
Below are the most popular Cub Cadet models we have. Enter your model number in the search box to find your model.
- A100 Electric Bed Lift
- A100 Electric Bed Lift
- A104 Front Brush Guard Att3
- A104 Front Brush Guard
- A104 Front Brush Guard Att2
- A104 Front Brush Guard
- A106 Front Receiver Hitch
- A106 Front Receiver Hitch Att2
- A106 Front Receiver Hitch
- A106 Front Receiver Hitch Att3
- A100C Work Fun Runner A100c 37a-100c129
- 110 Disk Harrow
- 110 Attachment & Kit
- 110 Attachment & Kit
- 110 Attachment & Kit
- 417 Loader
- 450 45-In Snow Thrower
- 100 Twin Rear Bagger
- 100 Vt Tiller
- 100 St 25A-262J756 Wheeled String Trimmer
