Parts That Fix Jenn-Air Range JDS9860AAP Gas igniter glows, but will not light
Gas igniter glows, but will not light is a commonly reported symptom for the JDS9860AAP Jenn-Air Range, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your JDS9860AAP Jenn-Air Range that will fix Gas igniter glows, but will not light. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
This is a surface burner igniter, also known as a top burner ignitor and stove top spark electrode. It is used to generate the spark that lights the surface burner. If your stove will not start, element does not heat, or gas igniter glows but does not light, replacing the igniter can solve these issues. For this installation, you will need a Phillips screwdriver and needle nose pliers. First place the grate on top of the burner, then lift the burner and disconnect the wires. Next remove the two Phillips screws from the bottom of burner, pull igniter out of the burner and wiggle in the new one. Refer to the installation instructions provided by the manufacturer for more instructions.
This part provides the spark to the burners.
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.