Models
>
AKS3040LL
AKS3040LL Amana - Overview
Models starting with AKS3040LL
Click on the best match to narrow your results.
- AKS3040LL (P1142513NLL) Amana Cooktop
- AKS3040LL (P1142518NLL) Amana Cooktop
- AKS3040LL (P1142525NLL) Amana Cooktop
- AKS3040LL (P1142522NLL) Amana Cooktop
- AKS3040LL-P1142513NLL Amana Range (Amana Range/Stove/Oven Model AKS3040LL-P1142513NLL (AKS3040LLP1142513NLL, AKS3040LL P1142513NLL) Parts)
- AKS3040LL-P1142518NLL Amana Range (Amana Range/Stove/Oven Model AKS3040LL-P1142518NLL (AKS3040LLP1142518NLL, AKS3040LL P1142518NLL) Parts)
- AKS3040LL-P1142522NLL Amana Range (Amana Range/Stove/Oven Model AKS3040LL-P1142522NLL (AKS3040LLP1142522NLL, AKS3040LL P1142522NLL) Parts)
- AKS3040LL-P1142525NLL Amana Range (Amana Range/Stove/Oven Model AKS3040LL-P1142525NLL (AKS3040LLP1142525NLL, AKS3040LL P1142525NLL) Parts)
Keep searches simple, eg. "belt" or "pump".
Spark Ignition Electrode
PartSelect #: PS11757464
Manufacturer #: WPY0316773
This spark ignition electrode lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in l...
$47.20
In Stock
Double Burner Bowl
PartSelect #: PS11740801
Manufacturer #: WP315600B
This black double burner bowl is eighteen inches long and nine and a half inches wide.
No Longer Available
Burner Cap
PartSelect #: PS11745641
Manufacturer #: WP8284669
Burner Cap - 6000 BTU
Sold individually.
$55.11
In Stock
Spark Ignition Module with Bracket
PartSelect #: PS2034431
Manufacturer #: 32020101
This spark ignition module lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in leng...
No Longer Available
Surface Burner Head
PartSelect #: PS11744559
Manufacturer #: WP7504P109-60
Sold individually.
No Longer Available
Top Burner with Electrode - Medium - 9k
PartSelect #: PS11757458
Manufacturer #: WPY0315768
$112.63
In Stock
Bolt - m3x6
PartSelect #: PS11740032
Manufacturer #: WP23001134
This electrode mounting screw is well under an inch long. It is made entirely of metal and has a Philips head.
No Longer Available
Burner Cap - Matte Black
PartSelect #: PS2033512
Manufacturer #: 31782601MB
The size of this burner cap is actually 2.5" to 2.75 inches in diameter.
No Longer Available
Spark Switch - 270 Degrees
PartSelect #: PS2194864
Manufacturer #: Y0316705
This part sits on top of the valve. Once the knob is turned it will create a spark that will light the gas and starts the burner.
No Longer Available
Common Symptoms of models starting with AKS3040LL
[Viewing 3 of 3]Will Not Start
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken Electrode, no spark
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner
Parts Used:
-
HUY from ALISO VIEJO, CA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
51 of 61 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
2 of 4 burners wouldn't light
Unplugged the stove, removed all 4 burner discs from the stove top (2 screws each) and disconnecting electrode wires as I pulled them out, removed the stove top, unscrewed the old module, removed the 6 wires, connected wires to the new module, screwed it into place, reinstalled the top while poking the electrode wires through the top one
... Read more
by one, put the stove top in place, connected the wires to the burner discs. Done, and it works! It took longer to find and order the part than it did to change it out.
Read less
Parts Used:
-
John from Alexandria, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
25 of 29 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner would not ignite when control in "light" position
Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the elec
... Read more
trode wire to the electrode. drop the burner assembly back into position on the cooktop. Attach the burner assembly using two screws.
Read less
Parts Used:
-
Michael from Friendswood, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
22 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!