AKS3040LL-P1142525NLL Amana Range - Overview

Diagrams for AKS3040LL-P1142525NLL

See every part. Know exactly what you need.

Parts for the AKS3040LL-P1142525NLL

$50.56

Spark Ignition Electrode

★★★★★

(6)

Part #WPY0316773

This spark ignition electrode lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in length. It pulls current from the ignition circuit; the more current it pulls, the warmer it gets. When the spark ignition electrode reaches ...Read more

Read less

Double Burner Bowl

Part #WP315600B

This black double burner bowl is eighteen inches long and nine and a half inches wide.

$51.61

Burner Cap

★★★★★

(2)

Part #WP8284669

Burner Cap - 6000 BTU Sold individually.

Spark Ignition Module with Bracket

Part #32020101

This spark ignition module lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in length. It pulls current from the ignition circuit; the more current it pulls, the warmer it gets. When the spark ignition module reaches a cert...Read more

Read less

Surface Burner Head

Part #WP7504P109-60

Sold individually.

$7.47

Screw

Part #WPY04100059

$126.63

Top Burner with Electrode - Medium - 9k

★★★★★

(3)

Part #WPY0315768

Bolt - m3x6

Part #WP23001134

This electrode mounting screw is well under an inch long. It is made entirely of metal and has a Philips head.

Burner Cap - Matte Black

Part #31782601MB

The size of this burner cap is actually 2.5" to 2.75 inches in diameter.

Double Burner Grate - Black

Part #316175MB

Valve Screw

Part #W10491986

Part might differ in appearance, but functions same as original. Sold individually.

Top Burner Valve

Part #31891901

Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion.

Common Symptoms of the AKS3040LL-P1142525NLL

How this model fails, and the parts that fix it.

Will Not Start

Fixed by
these parts

Show All

Gas igniter glows, but will not light

Fixed by
these parts

Show All

Element will not heat

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Broken Electrode, no spark

52 of 62 people found this instruction helpful.

HUY from ALISO VIEJO, CA
Easy
Less than 15 mins
Pliers, Screw drivers

Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner

Was this helpful?

2 of 4 burners wouldn't light

25 of 29 people found this instruction helpful.

John from Alexandria, VA
Really Easy
Less than 15 mins
Screw drivers

Unplugged the stove, removed all 4 burner discs from the stove top (2 screws each) and disconnecting electrode wires as I pulled them out, removed the stove top, unscrewed the old module, removed the 6 wires, connected wires to the new module, screwed it into place, reinstalled the top while poking the electrode wires through the top one ... Read more

Read less

Was this helpful?

Burner would not ignite when control in "light" position

22 of 29 people found this instruction helpful.

Michael from Friendswood, TX
Really Easy
Less than 15 mins
Screw drivers

Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the elec ... Read more

Read less

Was this helpful?