Troy-Bilt Chipper Shredder Parts | Same Day Shipping | Millions of Parts

Popular Troy-Bilt Chipper Shredder Parts

Your Price
$12.76
Wheel-Gear
(8)
PartSelect Number PS9455101
Manufacturer Part Number 734-04018C
This is a genuine OEM replacement part, it is sold individually. This is the front wheel on the models shown below. There are two of them on each mower. The wheel has a ring gear on the inside which is driven by the Right hand and Left hand smaller gear that attaches to the front axle on the transmission assembly.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Jay from GERRY, NY says,

Not the exact fit
I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently....read more

Your Price
$24.60
Blade-Flail
PartSelect Number PS9096396
Manufacturer Part Number 719-0329
This manufacturer certified flail blade is a metal blade used to shred or cut lawn and garden debris. If the blade becomes dull it should be sharpened or replaced, depending on the extent of the damage or warping Installation is rated as "Easy" by customers and requires a hex key and wrench. This blade attaches onto the impeller assembly.
Fixes these symptoms
No Symptoms for this part
Your Price
$14.90
Lawn Mower Ground Drive Belt
(1)
PartSelect Number PS9172714
Manufacturer Part Number 954-04032B
3/8 x 36-1/8-inch This ground drive belt (part number 954-04032B) is for lawn mowers. Ground drive belt 954-04032B drives the transmission, which propels the lawn mower wheels. Wear work gloves to protect your hands when installing this part.
Fixes these symptoms
No Symptoms for this part
Your Price
$21.30
Chipper Blade
PartSelect Number PS9462700
Manufacturer Part Number 981-0490
The Chipper blade attaches to the impeller and is used for cutting. Installation is rated as "Easy" and requires pliers, a socket set, wrench set, and allen wrench set. A dull blade must be sharpened or replaced. If the blade is warped or damaged, this OEM part will be the right replacement if recommended by your owner's manual.
Fixes these symptoms
No Symptoms for this part
Your Price
$7.21
Push Cap
PartSelect Number PS9300605
Manufacturer Part Number 726-0214
The Push Cap is a black plastic cap which secures to the end of a shaft to prevent injury. It can be installed with a hammer and is rated as "Easy" to install. If the part appears damaged or worn down in a way that could cause injury, it should be replaced. Refer to your make, model and diagrams to check if this is the right part for you.
Fixes these symptoms
No Symptoms for this part
Your Price
$2.99
Nut, Flange Lock, 3/8-16, Grf
PartSelect Number PS9095080
Manufacturer Part Number 712-04065
Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also be called a Flange Lock. This nut is designed to lock in place, preventing vibrations and other parts coming loose. This nut may be located in multiple locations on your machine, refer to your owners manual to determine if this is the correct part. You will need a wrench or socket set and a torque wrench to complete this repair. You should only torque the nut to the manufacturer recommendation, no tighter. You will need to replace this part when it is worn or damaged. While this part can wear through regular use, it is most commonly damaged through improper use of a wrench or socket. Customers describe this repair as Easy.
Fixes these symptoms
No Symptoms for this part
Your Price
$2.99
Nut, Flange Lock, 5/16-18, Grf
PartSelect Number PS9092936
Manufacturer Part Number 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.
Fixes these symptoms
No Symptoms for this part
Your Price
$2.99
Nut, Flange Lock, 1/4-20, Grf
PartSelect Number PS9299574
Manufacturer Part Number 712-04064
Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when properly threaded. It is sold individually, not as part of a kit or assembly. It is black, made of metal, and is found in a variety of locations. Refer to your owners manual to determine if this is the correct part. This part will need to be replaced when it is weak or broken. The symptoms experienced when this part breaks will depend on its location. You will need pliers to complete this repair. Customers rate this repair as Easy.
Fixes these symptoms
No Symptoms for this part
Your Price
$14.50
Flail Blade
PartSelect Number PS9098575
Manufacturer Part Number 719-04308
The flail blade is a metal blade used to shred or cut lawn and garden debris. If the blade becomes dull it should be sharpened or replaced. Installation is rated as "Easy" by customers and requires a hex key and wrench. This blade attaches onto the impeller assembly. Refer to your make, model, and diagrams to check if this blade is right for your machine.
Fixes these symptoms
No Symptoms for this part
Your Price
$3.17
Fl--Wash. 5/8" I.D. x 1" O.D.
PartSelect Number PS9301843
Manufacturer Part Number 736-0366
Fixes these symptoms
No Symptoms for this part