Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Cristina S - October 8, 2020
Verified Purchase
Perfect buy
The part was exactly what I needed for my Frigidaire stove's oven. Previous house owner put aluminum foil on the bottom and it melted into it. The replacement I bought from Part Select fit perfectly, was easy to install (2 screws) and my oven looks new again. Shipping was quite fast but cost a little bit too high, though! All in all, I am very satisfied with the purchase.
★★★★★
★★★★★
Irene V - June 1, 2020
Verified Purchase
Fit perfectly
This part fit perfectly and arrived quickly. I would recommend ordering
★★★★★
★★★★★
Dennis J C - December 15, 2019
Verified Purchase
Perfect Fit and Finish
Like many I cant read CLEAR directions and put foil on the oven bottom panel.
Oops, Parts Select to the rescue....
★★★★★
★★★★★
John S - May 30, 2019
Verified Purchase
easy repair
part was exact match and only 2 simple screws to repair
★★★★★
★★★★★
Heidi F - January 2, 2019
Verified Purchase
Easy repair
The part arrived quickly. Easy to install!
★★★★★
★★★★★
Joan M - November 26, 2018
Verified Purchase
Prompt replacement of oven panel
The part came in perfect condition and everything went as easily and smoothly as possible. It matched the color of the replacement part perfectly. It came faster than I thought it would and it couldn't be easier to install. It is the first time I did this and it was a wonderful experience. Thank you for excellent service.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven bottom panel
Unscrewed old panel/removed and inserting new panel and used same 2 screws to secure in place.
Maria from NEW ORLEANS, LA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Panel finish ruined by tin foil
Removed both oven racks the removed two screws in back. Lifted rear of panel until front lip of panel was free. Installed new panel in reverse order. I was recycled the old steel panel at our local recycling station.
Barry from MOORE, OK
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacement of bottom oven panel
Very simple. I removed the oven racks, loosened the two screws that held the old panel in place, lifted out the old panel and replaced it with the new one, then tightened the screws to hold the new panel in place. It took no more than 10 minutes.
Eileen from AKRON, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom oven plate had foil stuck to it
Very easy to order,part was delivered promptly and installation was easy.I unscrewed a few screws and lifted the bottom panel out and put the new one in.
Wilma from Syracuse, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burnt in aluminum foil...unable to remove
took the two screws out by hand, slipped out the ruined panel, slid the new one in place, replaced the two screws...simple as that
Michael from Lamoni, IA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven bottom had foil stuck on it would not come off
First I removed the two screws that hold the bottom panel I then pulled the panel out and put the new panle in and put the two screws back in
ronald from brownsburg, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
15 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Meaghan
October 10, 2017
I am looking for the bottom panel to this gas range the part number is 31640060 . I am not finding exact match. Is this part the same thing ? Thank you
For model number GLGF386DSK
Hi Meaghan,
Thank you for your question. This is the correct bottom of your oven according to your model information. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Austin
November 25, 2017
Does this control clock, cook time, bake, broil , etc
For model number 79078734400
Hi Austin, Thank you for the question. This is just the plastic panel. The electronic board you need is Part Number: PS2378935. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joseph
December 19, 2022
Can u manually clean the bottom plate? I have tried to clean by hand but debrie won’t come off
For model number LGGF3044LWB
Hello Joseph, thank you for reaching out. Yes, you can clean the range bottom panel by hand without harsh chemicals. Make a paste with baking soda and water, and use an old sponge with an abrasive pad to rub the baking soda paste over the bottom of the range. Leave a layer of the baking soda paste over the surface of the bottom panel for 12 to 24 hours. Then wet it later and scrub it off. Over time, the baking soda will loosen the debris, making it easy to wipe away. We hope this information helps!
