Spinner Kit 8193983

Hi Cathleen, Thank you for your question. Unfortunately you would have to replace your spinner kit. I hope that helps. Good luck with your repair.

Hello Eugene, Thank you for sending in your question, looking through the symptoms for this model and other customers comments they have replaced the Circulation Pump and Motor part number PS11757388. There is a video on the site on how to install this Pump and Motor and it should be of some help for you. Hope this helps!

Hello David, thank you for your question. We would recommend replacing the spinner itself. I hope this helps.

Hi Cathy, Thank you for your question. If the dishes on the upper rack are not getting clean, there are some things that you will need to check to see what is causing the issue. There may be something blocking the spray arm preventing the water from reaching the upper rack. Check to make sure that there are no obstructions. If the dishwasher is overloaded, this can prevent your dishwasher from cleaning properly. The holes where the water comes out of on the spray arm may be clogged and you will either have to clean the holes out or replace the spray arm. If the dishes are not placed correctly in the rack, this can prevent them from being cleaned properly. Cups and bowls should face down or otherwise water will collect in them. The face of each dish should face toward the center of the dishwasher. Place glasses between spindles rather than on or over them so that water doesn't get trapped. If the water pressure is low going into your dishwasher the dishes on the top rack may not get clean. This can be caused by a kink in the dishwasher hose or low water pressure to your home. If it happens only occasionally, it may be caused by other appliances or activities using water, such as the clothes washer, bathtub and sprinklers. I hope this helps. Thank you and have a great day!

Hi Teresa, thank you for your question. It should work though you might have an excess of water coming from the tube at the top where the missing spinner is. So you may see a decrease in the quality of the dish wash. I hope that helps. Good luck with your repair.

Hello Rita and thanks for writing. We have attached the link to our repair video. We hope this helps. Please contact us anytime. https://www.youtube.com/watch?v=z0rPfElzIPA&feature=emb_title

Hello Wanda, thank you for your question. The first thing we recommend doing is removing the top spinner and cleaning it very well. Make sure its attached securely and that the part is not clogged. It would also be a good idea to check under the bottom spray arm for any clogs or debris that may be down in the sump, if the sump is clogged the water will not be pushed through to the other spray arms. If these sections are clear, we would recommend checking the back manifold tube, and where it connects to the bottom of the dishwasher. I hope this helps!

Hi Deb, Thank you for your question. If the dishes on the top rack are not getting cleaned, then it could be the top spinner. The top spinner should not be wobbling and it should run smoothly. Make sure the holes in the spray arms are not clogged with debris. Make sure the water is hot when using the dishwasher. Run the water in the tap for a few minutes until it is good and hot and then run the dishwasher. Make sure there is adequate water pressure going to the dishwasher. Also, check to make sure the heating element in the dishwasher is working correctly if not, this can prevent the dishes from getting cleaned correctly. How you arrange the dishes in the dishwasher is important as well. If they are arranged in a way that will prevent the water from reaching the dishes on the top rack, then this will prevent them from getting cleaned. There are some other parts that you will need to check to see which one is causing the issue. You will need to check the chopper assembly, the spray arm seal, the sump pump check valve, the impeller and seal kit, the circulation pump and motor, the water supply manifold probe, the lower spray arm, the feed tube and the sump and motor assembly. I hope this helps. Thank you and have a great day!

Hi Stan, Thank you for your question. We do actually have an installation video for this spinner kit. Here is the link: https://youtu.be/z0rPfElzIPA . Good luck with your repair.

hello Wayne, Thank you for the question. We suggest checking or replacing the Dishwasher Control Panel Seal, PartSelect Number PS11746208. We hope this helps.