Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
September 2, 2019
On the freezer door how can the stainless steel frame around the ice and water dispenser be removed. I need access to clean the water dispenser spigot and replace the interface display board.
For model number PSS26MSRCSS
Hello Ron, Thank you for the question. Using a putty knife slip it in around the trim gently prying the trim away from the door to pop it off. You may also need to remove the drip try to see if there is a screw that needs to be replaced underneath. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
September 23, 2017
How to pop off trim access panel mfg's pn wr38x10337. I am using a 1 1/2" putty knife and slipping in under the panel (various places) and it is not popping off. I hesitate to use too much leverage. What is the trick? Thanks, tom
For model number PSS26SGRCSS
Hi Tom,
Thank you for your question. It sounds like you're doing it the correct way. Sometimes, when you remove the drip tray at the bottom, you can actually pop the trim off from there. You will see a little seam between the cavity and the trim once the drip tray is out of the way. Sometimes slipping your putty knife into that area and pushing out gives you a lot better leverage. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
