Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cat
September 12, 2017
The start button broke on my electronic board to i have to purchase a whole new board or can just the button be fixed? Thank you for your time
For model number DPSB613ED1WW
Hi Cat,
Thank you for your inquiry. You may have to replace your board and you may also have to replace your overlay as well. If the physical button on the board is broken and sticker over it is also broken, you would need to replace both of these parts. Good luck with your repairs.
The plastic overlay for my start button broke. The plastic label is intact & the circuit board functions when pressed. Can i just replace the plastic overlay? If so how do i remove it as i tried but did not want to force anything & cause any bigger issue. Thank you!
Hello Ryan, thank you for your question. Please resubmit your question on the site with the model number of your equipment so that we can find the parts and information for you. Thank you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terri
November 6, 2017
My board lights up but when I push start I hear a click. The click comes from the transformer. The dryer doesn't start. Do I need to replace that board?
For model number DPSB519EB0WW
Hi Terri, Thank you for the question. I suggest testing the Door Switch,PartSelect Number PS2344321 and the Interlock Switch,PartSelect Number PS1481922.If these parts are defective it can prevent the appliance from operating.You can use a Multi Meter to check for voltage and resistance. Hope this helps!
Was this helpful?
Thank you for voting!
Kevin
January 22, 2018
Gas dryer runs fine but won't heat. Disassembled dryer and checked continuity on all thermostats, trimmer, igniter and coils. All checked out good. Gas supply is good and there are no clogs. I thoroughly cleaned it while disassembled. It still won't heat. Igniter doesn't glow but checked good for continuity. I hear 3 clicks about 5 seconds apart coming from the backsplash area at the electronic control board. Is there a way to troubleshoot the electronic board? We4m296 thanks!!
For model number DPSB513GB0WW
Hi Kevin,
Thank you for your question. You can test the electronic control board with a multimeter. Set the multimeter to the lowest range for ohms and touch one end to neutral and the other end to where the wire harness plugs into the electronic control board. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Lance
April 18, 2023
All the lights work on the circuit board, but the start button doesn't function anymore. When I press the start button, there is no click as it previously did and then all the lights go out. Can I just fix or replace the start button on my dryer? Serial # DF727193A Also can you tell me what year this was made? Thank you
For model number DNSB514EBOWW
Hi Lance, thank you for reaching out. We have searched and found that your appliance was manufactured in November 2003. We would suggest you check the electronic board, part number PS960326, to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
