Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert W - April 24, 2021
Verified Purchase
Easy peasy.
Fit was perfect and install went well with no problems.
★★★★★
★★★★★
William D - January 6, 2021
Verified Purchase
Oven Element Replacement
Normally you would be able to replace the elements from the front of the oven however in my case the quick connect wire components were burned out so I need to get behind the oven to replace wiring. Removing the double oven from the wall was easier than I thought with the help of a furniture trolley, and a box on top of it, built using 2x8 board. By myself I was able to slide the oven out onto the trolley and roll it out into the dining room to get elbow room to work. Once the wiring and the elements were repaired I rolled the oven back into the kitchen, connected the 240V supply, and slid it back into its cabinet. What do the French say, “Viola!”? Saved myself a bundle by DIY!!! BTW, the replacement elements were GE but they were direct equiv to OEM for Kenmore, at exactly 21.5 Ohms, as per specs. 4 stars instead of 5 because pricepoint was higher than other suppliers but only Partselect had the stock. I would buy from them again. Shipping was FAST, wow thanks.
★★★★★
★★★★★
Mike B - December 3, 2019
Verified Purchase
Simple Repair!
Replaced heater coil after noticing oven was not heating up to expected temperature. Simple screw removal and switch out of old coil. Took less than 30 minutes! Part works perfectly! Good as new now.
★★★★★
★★★★★
Mary R - May 1, 2018
Verified Purchase
Perfect part
Received promptly. Well packaged.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
oven not at set temp on preheat When it heat actual set temp the top of the cakes would burn
Replaced bottom bake heat unit
Michael from FREDERICKSBRG, VA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.