Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Laura
September 30, 2017
The push button to open microwave door is broken..... i have been sent part #wb06x10581 how do i try to install said new part thank you very much for any insight in doing this repair
For model number PEM31SM4SS
Hi Laura,
Thank you for your inquiry. I have found a customer story that you may reference on how to install the part, "Used flathead screwdriver around the interior edges of the front panel to pry off the front panel. The handle comes with it and along with a glass panel inside. Pry off that glass panel and transer it to the new front panel and pop it back in. I removed the two screws from the cracked handle and used them to install the handle to the new front panel. But, before this I added a couple of plastic washers to hopefully distribute the load better against the front panel and maybe prolong the life of the repair. I cleaned the interior glass, since that's hopefully the last we'll ever see of it. Take the whole assy and just snap it back in place on the door. This $100 in parts probably saved me $600-700 for a new microwave / over-oven install charge." I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
