9495615-1-M-Bosch-00755058-IGNITER
Part Location Diagram of 00755058 Bosch IGNITER
See part 604 in the diagram
( Grid squares measure 1x1 inch )
9495615-1-S-Bosch-00755058-IGNITER 9495615-2-S-Bosch-00755058-IGNITER Part Location Diagram of 00755058 Bosch IGNITER
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

IGNITER 00755058

 Fits your HGI8054UC Range!

Rated by 1 customer 

A Bit Difficult 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 142.46
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your HGI8054UC Range!
PartSelect Number PS9495615
Manufacturer Part Number 00755058
Manufactured by Bosch
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
Bosch.
Part# 00755058 replaces these:
AP5809118, 755058
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.8 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Igniter replacement
Getting to the igniter is trivial, only requiring the removal of the stove bottom (two set screws) and a heat shield (the heat shield is held in place by screws with size 20 star-driver heads). At this point a splice could be made to the original wires, IF ceramic wire nuts were included with the replacement igniter (but, alas, they are not). IF a splice were made the repair would be a very easy, 10-minute job.

To replace the igniter then requires the complete removal of the back of the range (17, size 20 star-driver, screws, if I remember correctly), plus the removal of an additional heat shield (one more screw). Then one must carefully lift and free the back from tabs on both sides that are set into slots. (Oh, and you probably want to loosen the electrical cord shield that interferes with the back coming off.) The new igniter wire plug is only then very easily re-attached to existing harness. Everything is then replaced to finish the repair.

None of this is difficult, if you don't mind moving your range away from the wall and dealing with on the order of 20 screws. Personally, I think I would have rather found an igniter with ceramic wire nuts to splice to the original wires (certainly not as elegant as replacing igniter and wires entirely, but far quicker and easier).
Read less
  • Jeffrey from Bloomington, MN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
10 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS9495615
Manufacturer Part Number: 00755058
Brand
Model Number
Description
Bosch
HGI8054UC
Range - GAS RANGE
Bosch
HGI8054UC-07
Range - Range
Bosch
HGIP054UC
Range - RANGE
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
IGNITER
$ 142.46
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.