Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephen
October 18, 2017
Trying to figure out how the chokes go onto this lawn mower. Replaced the carburetor and forgot to take a picture of the choke arms prior and now can't figure out or find a diagram for them.
For model number 121S020130F1
Hi Stephen,
Thank you for your question. First you will have to remove your starter rope from your handle. Then remove the blower housing cover. You will see your choke link there. Push the choke arm on the left hand side forward. This is where you attach the side of the link that has that half circle bend closest to the end. To avoid bending the new link, we suggest removing your muffler. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
