Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
no water or ice dispenses
Wires(pins) on display connection at bottom of freezer door had been re-arranged by a technician(bad tech). had to determine placement of pins in connector and location board. Snapped new board in and tested for proper operation.
Perry from daphne, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alexis
April 4, 2018
Ice and water are not being dispensed so i believe i need part 93 according to your diagram for my model. But how do i know if my current part 93 is actually malfunctioning or it’s something else? I pulled the board out and there is also a solenoid that sits next to the board and there is definitely water somehow accessing the area. There are drips of rust coming from the solenoid. So how do i know what isn’t working?
For model number GSS25TGPDWW
Hi Alexis,
Thank you for your question. Unfortunately only a technician would be able to test your board but you can test your solenoid with a multi meter to make sure that part is working alright. That would probably be the best course of action. Then you would be able to either confirm that it is your solenoid or rule it out. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
