Part Location Diagram of WP8053334 Whirlpool Rear Drawer Glide
See part 6 in the diagram
Replacing your Whirlpool Range Rear Drawer Glide
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Rear Drawer Glide WP8053334

 Fits your TES355KQ0!
★★★★★
★★★★★
11 Reviews

Rated by 11 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 11.12
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your TES355KQ0!
PartSelect Number PS890554
Manufacturer Part Number WP8053334
Manufactured by Whirlpool
Product Description

Rear Drawer Glide Specifications

This OEM replacement rear drawer glide supports the storage drawer on your range, and allows the drawer to open and close with ease. If your storage drawer will not open or close, or catches and sticks when you are trying to move it, there could be an issue with the glides. Check the glides and glide channels for any physical damage, and make sure they are properly fastened to the range walls. To complete this quick and easy repair, you will need a Phillips screw driver. Because the drawer has four glides and each are sold separately, make sure to order the correct amount you require.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Whirlpool Range Rear Drawer Glide

Replacing your Whirlpool Range Rear Drawer Glide
Troubleshooting
This part fixes the following symptoms:
Door won’t close
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Roper, Estate, Maytag.
Part# WP8053334 replaces these:
AP3590924, 3195062, 8053334
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
11 Reviews
4.5
Filter By Rating:
  • 5 Stars
    9
  • 4 Stars
    0
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 4.5 / 5.0, 11 reviews. What's this?
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing installation instruction that matched.
Draw handle broke. Slides worn out
Replaced handle and slides. Drill third hole in handle add one more screws.
Other Parts Used:
HNDLE-DOOR Front Drawer Glide Rear Drawer Glide
  • Richard from EAST LYME, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken glide
replaced glide with screwdriver. very easy
Other Parts Used:
Front Drawer Glide Rear Drawer Glide
  • Andrew J from MASSAPEQUA, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element had burned out, and the drawer glides were broken .
Replaced both .
Other Parts Used:
Oven Bake Element Rear Drawer Glide
  • Allen from ASHLAND, PA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door glide broken
removed the old ones.then installed the new ones.
  • David from Port Orange, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
slides on lower drawer were broken
I used a phillips screwdriver and replaced the part with one screw.Very easy and replaced my lower drawer under my oven,it tool about three to five minutes at the most and my drawer works fine now.Thanks for the instruction video on line, it really helped.
  • Leona R from Louisville, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken rear stove drawer glide
Removed drawer, after removing the 50# of junk in the drawer, Used screw driver to remove screw that holds glide to drawer and then place new part into place put screw into hole and tightened screw. Replaced drawer and told wife not to put 50# of junk back into the drawer.
  • John from Maysville, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Rear Drawer Glide
This was a very smooth repair. In total it took about 5 minutes. The pot drawer below the oven wasn't gliding like it once did. After I replaced the glides it works like new. Please note, if you are going to replace one side go the next step and replace both to provide balance to the drawer.
  • Ed from Maple Grove, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken bottom drawer glide and missing rivet on drawer front panel
Removed the old, broken drawer glide by removing the Phillips head screw. Then placed the new glide into place and fastened with the existing screw.

The rivet on the top of the bottom drawer front was missing. I lined up the drawer front with the supporting bracket behind it and inserted the rivet. All you have to do is tap the top of the pin in the center of the rivet to lock it in place. No rivet tool is needed. That should be explained in the parts listing because I bought the rivet tool before I realized I didn't need it.
Other Parts Used:
Rear Drawer Glide Rivet, Push (White)
  • David from Fairborn, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
3 burners had stopped working and drawer glides broke.
Removed the old burners and lifted top assembly. It made it easier to work with the wires by removing the top, easily remove the screws holding the wire harness and ground wire, then slid the top to the right and it came right off. splicing the wires in was very easy and all the parts required were sent with the kits. reassembled stove and it worked like a champ. The drawer was very easy as well the plastic glides were all broken or worn out, and one screw each to replace. like a new oven now, saved at least 300 by not purchasing a new one.
Other Parts Used:
Receptacle Kit Rear Drawer Glide Front Drawer Glide
  • Tracy from Green Cove Springs, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
11 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken drawer glides
Simply removed the bottom drawer, unscrew the old broken glide, and attach the new glide. Simple and no hassles.
Other Parts Used:
Rear Drawer Glide Front Drawer Glide
  • Shane from Palatine, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
July 30, 2019
What is the part number for the matching part that goes inside the oven? The glide guide so to speak.
For model number TES325MQ5
PartSelect logo
Hi William, Thank you for your question. The part number listed under your model number for the top drawer glide in the oven cavity is PS11748403. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS890554
Manufacturer Part Number: WP8053334
Brand
Model Number
Description
Whirlpool
4RF302BXEQ1
Range - Freestanding, Electric
Whirlpool
4RF302BXGQ0
Range - Freestanding, Electric
Whirlpool
4RF302BXGQ1
Range - Freestanding, Electric
Whirlpool
4RF302BXKQ0
Range - Freestanding, Electric
Whirlpool
4RF302BXKQ1
Range - Freestanding, Electric
Whirlpool
4RF315PXEQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXGQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXKQ0
Range - Freestanding, Electric
Whirlpool
4RF315PXMQ0
Range - Freestanding, Electric
Kenmore
66572002100
Range
Kenmore
66572002101
Range
Kenmore
66572002102
Range
Kenmore
66572002103
Range
Kenmore
66572002104
Range
Kenmore
66572004100
Range
Kenmore
66572004101
Range
Kenmore
66572004103
Range
Kenmore
66572004104
Range
Kenmore
66572132300
Range
Kenmore
66572132301
Range
Kenmore
66572133300
Range
Kenmore
66572133301
Range
Kenmore
66572134300
Range
Kenmore
66572134301
Range
Kenmore
66575002100
Range
Kenmore
66575002101
Range
Kenmore
66575002102
Range
Kenmore
66575002103
Range
Kenmore
66575002104
Range
Kenmore
66575004100
Range
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service