Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Davis
June 6, 2019
When my Whirlpool microwave stops, and I open the door, the interior light does not come on. Then when I try to start it again it says to close the door. The light eventually comes on, but sometimes it takes a long time.
For model number WMH53520CS6
Hello Davis, Thank you for the question. This sounds like an issue with the Door Switches, PartSelect Number: PS2361111, PartSelect Number: PS2361113 or PartSelect Number: PS10057151. You can test the switches with a multi meter to check for continuity. Hope this helps!
Is there a ohms reading for the door switch just to make sure part is bad?
For model number MMV4205DS1
Hello John,
Thanks for your question. Due to the electrical charge that the parts inside the microwave can still hold even when the microwave is turned off, we recommend having only a licensed service technician test and install the door switch parts.
I hope this helps.
