This surface element is for ranges.
Surface element supplies the heat to a cooking area on top of the range.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Wall Oven, Cooktop.
This part works with the following products:
General Electric.
Part# WB30T10155 replaces these:
AP5791281
Customer Reviews
Average Rating:
★★★★★
★★★★★
14 Reviews
4.7
Filter By Rating:
5 Stars
11
4 Stars
2
3 Stars
1
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
June M - February 3, 2024
Verified Purchase
Great part, works well
I have been using my stove with the new big burner. It works great. I didn’t know if I could still find a burner for it. My stove is one of the older appliances but I was able to find a match and my husband installed the burner easily.
★★★★★
★★★★★
Michael H - May 3, 2023
Verified Purchase
Part worked as expected
Arrived on time and intact, the repair was fairly simple
★★★★★
★★★★★
Jerry H - December 15, 2022
Verified Purchase
Ge oven element
The part I ordered shipped immediately .I received it undamaged, and even received an email with instructions to install it. Installation went well, and it is great to have the mult element working again. I will always fall back on Part Select if the need arises.
★★★★★
★★★★★
Dean A - September 17, 2022
Verified Purchase
Arrived Damaged, but worked.
Part worked. Good fit. Not packaged well, the heat proof ring was cracked in three places and fell out. The one I replaced had a good one and used that.
★★★★★
★★★★★
Dave Van I - September 16, 2021
Verified Purchase
Worked fine
Worked fine out of the box, installation was simple. BUT, you can get this identical part on Amazon for about $70 cheaper.
★★★★★
★★★★★
Addie W - August 5, 2021
Verified Purchase
Perfect Fit
The element replacement arrived very quickly. Though it was our first time ever to try to replace an element, we watched a video and were able to install the it without a hitch. It is the element I most use and now works great again.
★★★★★
★★★★★
Thomas A R - April 25, 2021
Verified Purchase
It was not hard.
The part came the next day. And it was fairly easy replacing old burner. It took about 30 minutes to finish the repair.
★★★★★
★★★★★
Leonard U - April 23, 2021
Verified Purchase
This burner works as a perfect replacement for my GE Glass Top push in range
I think that the quality of this replacement burner is very good. I would recommend this part if it is is shown to be compatible with your range unit. I received my burner in less tthan 24 hours.
★★★★★
★★★★★
Mark C - December 2, 2020
Verified Purchase
Exact replacement
The part was an exact replacement for my 12” triple burner. It came fast and installed easily.
★★★★★
★★★★★
Rodney M - July 9, 2020
Verified Purchase
Element
part was received much faster than I anticipated. Packaging was solid and no damage to part. Part worked as it should when installed
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 2.9 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Center part of the heating element failed. (Broken, not burned)
Cut all power to the range. Easy to remove front panel and then screws and nuts that hold both white frame and glass top to range. Once the top can be lifted, cut the plastic zip tie that retains the harness. Unplug the harness and then remove the top. make provision for new zip tie before the range top is re-installed. The range
... Read more top is to be inverted for installing clips to the new heating element. Make sure that the holes line up to the pointed clips that hold the element. Not required to move the range.
Read less
Norman from Sebring, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The center burner element of the large triiple burner was not working
The real challenge on this particular glass top range was to figure out which screws had to be removed to lift the glass top to get at the burner elements to do a replacement.
Removed the two side screws holding the control panel in place. Disconnected the two wire harnesses and took off the control panel to allow easier acces
... Read mores. Then examined the screws attaching the vertical plate in front of the glass top. Most of them were on the on the vertical plate but a few were in the bottom of the horizontal plate. If successful, the vertical plate can be moved forward giving access to the glass top. You pull up on the front of the glass top and when it just clears the vertical front plate you pull the top forward a bit to get the back end of the top out of the read chrome vent piece. I then leaned the glass top up to about a 75 deg angle and then propped the top with a 24” wooden garden stake. I used two stakes to hold the top up. The challenge after that is to remove the old burner and carefully note the colored wiring and locations of the connectors and removed the three old clips. That took a bit of effort. several of the wiring harnesses were very short so you had to be careful when removing and installing the new burner. The burner has numbers stamped on the metal and you must note each number where the clips are located. The rest is to reverse the process. Some of the insulation pieces came off and some of the insulation clips fell off and you must be sure to get the insulation pieces back on in the correct location. Expect a lot of gunk that needs to be cleaned on the top and trim pieces. I save around $200 by doing my own replacement.
Read less
Leonard from NAPLES, FL
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large 3 element burner quit and hot temp light stayed on constant
Thought it was the switch, being 2 of the wires were burnt. After troubleshooting, and determining the burner was getting power from the switch, but still not working, I ohmed the elements on the burner. There was no continuity through the elements. Checked the contacts in the temperature probe in the burner. The contacts were open, be
... Read morecause the probe broke internally. Replaced the burner, and it all works now. Also replaced the switch, since it was burnt. Had to put new ends on the wires that were burnt also.This is the second time we had to replace this burner. The first time, the large burner element broke. Little disappointed that these burners don't last longer. We bought the stove new, but it was out of warranty when the burners quit.
Ask our experts a question about this part and we'll get back to you as soon as possible!
10 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ket
August 8, 2018
The middle size of the three sizes of heating element built into 12'', 9'' and 6' doesn't work. Do i need to replace all of the 12'',9'', 6''? How to remove the glass cooktop if we have to install a new three sizes of heating element (12'', 9'' and 6'')
For model number PS950SF3SS
Hi Ket,
Thank you for your question. If there is only one burner, the medium sized burner, that is not working that is not working, then the issue maybe with the burner switch that controls it. You should check both the burner switch and the element with a multimeter to see which part is causing the issue. I hope this helps. Thank you and have a great day!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Dennis
August 13, 2019
The two middle elements on the triple burner(9" and 6") have stopped working. The 12" still turns on and heats up. What could cause this and how can it be fixed?
For model number ps950sf3ss
Hello Dennis, thank you for your question. It sounds like the Triple Haliant Element has become faulty and needs to be replaced. This part number PS8754838 is the correct replacement for your model. You should also check the Terminal Block (part PS953027) to see if there is any damaged electrical wires. I hope this helps and good luck with your repair!
8 people found this helpful.
Was this helpful?
Thank you for voting!
David
August 5, 2019
My large 12" element has 3 sizes in it. This is the power boil one. The smalest element does not work. I replaced the element with a new one and the problem is still there. What else can it be?
For model number PS950SF3SS
Hi David, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
February 28, 2018
Does this element have the three sizes of heating element built into 12”, 9” and the 6”?
For model number Js750
Hi Bill, Thank you for the question. Yes, this is the Triple element with the 3 sizes of heating surfaces. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Carlos
December 21, 2019
My burner 12" not work
For model number JB750SF2SS
Hi Carlos, it is likely a faulty switch or element. Thank you for your question and good luck with your repair!
My large triple element will come on for a few minutes and then shut off
Also the red indicator light will stay on for that element
For model number JS750DF3WW
Hi Don,
Thank you for your question. If the element will only stay on for a few minutes and the indicator light remains on, there is an issue with the switch that controls the burner and it will need to be replaced.
The part number listed under your model number for the burner switch is PS11771843. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Hello. Can I replace just the sensor on a tripple element for the the glasstop range. Or do I need to replace the entire elemnet? Thank you in advance for your time.
For model number PCB985SK1SS
Hello Chris, thank you for the query. The sensor is not sold separately, you may need to replace the entire element for it, the part number is PS8754838. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Carol
January 5, 2024
Will the element haliant 12 triple fit my stove model
For model number JS750SF3SS
Hi Carol, thank you for contacting us. Yes, the surface element, part number PS8754838, will fit in your model. Glad to be of assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Roy
May 5, 2022
GE Range - Radiant, The Triple element, the two larger elements work but the small element doesn't would that be the dial control or the element it self?
For model number JS750DF3WW
Hello Roy, thank you for writing. The Triple Element PS8754838 is as solitary unit for the all the 3 sizes and the Switch PS11771843 is one unit as well. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
John
January 7, 2019
I have a g/e stove and the heat indicator light is constantly on and the largest front burner does not come on. All the other burners work and the heat indicator light goes on and off for the other burners. Am correct that I would only have to change the element that is not turning on. I ask this because the heating light remains on - don't know if that sensor is causing the element not to heat.
For model number PS950SF2SS
Hello John, Thank you for the question. I first suggest testing the element with a multi meter and check for continuity. You can also check to make sure all the wiring is connects properly and not damaged. In most cases it is the switch that controls the element is bad, in this case it would be part of the Control unit, Part Number: PS8767155. Hope this helps, good luck with this repair!
