Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Darlene
February 24, 2018
I need the 3 prong that holds the element up..need for the 8" and the 10" what are the prices and part number?
For model number JB250
Hello Darlene, Thank you for your inquiry. Part# WB17X210 is the complete surface burner terminal block kit for your model, which has the terminal block, mounting clip and wires. The receptacle clip for your model part# WB02K10381 and both parts are the same for all four burners. Hope this helps!
Was this helpful?
Thank you for voting!
Darlene
February 26, 2018
I must not be asking for the correct part, i wish i could draw it. I need for the 8" and 10" burner coil that holds up the burner coil , clips onto the bottom of the burner coil that you put the pot on . That i have..i measured them and they are not the same..again i am so sorry that i cannot explain it right and i need those part numbers and prices..and this sets into the burner pan, so that the coil is not sitting directly on the burner pan
For model number JB250
Hello Darlene, Thank you for your inquiry. Are you referring to the drip bowls that sit underneath the coils? They are available in 8" inch and 10 inch and come in black part# PS244399 (for the 8 inch coils) price $7.46 and part# PS244398 (for the 6 inch coils) price $6.55, also come in silver part# PS244394 price $7.65 and part# PS244395 price $9.70. Hope this helps!
Was this helpful?
Thank you for voting!
Jose
March 26, 2018
Hi, I would like to know if this kit comes with the connector for the four surface heating and burner elements?Thank you in advance
For model number jb250df1ww
Hi Jose, Thank you for the question. This is just the Clip for the receptacle. The terminal block woudl be Part Number: PS232606. The kit comes with the terminal block, mounting clip, and wires. This surface burner terminal block kit connects the wiring harness to the surface elements.Hope this helps!
Was this helpful?
Thank you for voting!
Darlene
February 25, 2018
I am asking another question to the one you sent a reply to..the 3-prong that holds the element up you said was the same for the 10 and 8 inch elements..the size for the 10 inch element are 4" long each and there are 3..the size for the 8" is 3"
For model number JB250
Hi Darlene, Thank you for contacting us again. The Receptacle is made to accept the prongs on both size elements. Good luck with the repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
