The function of the Refrigerator Water Inlet Valve (Triple Solenoid Water-Valve, Water Valve, Water Inlet Valve, Refrigerator Water Inlet Valve Assembly) is to release water from the supply line when activated, and send it through to your water dispenser or ice maker in your refrigerator. The water inlet valve is located at the back of the refrigerator, and connects to the water supply. The valve can break from material fatigue or normal use. If your water inlet valve is malfunctioning, you could be getting a lack of water to the inside of your refrigerator. Your ice maker may not produce cubes or your water dispenser may not work. The water inlet valve must be replaced if the solenoids no longer have continuity or the valve has internal blockage. This valve measures approximately 7 inches long and 4.5 inches wide, and is constructed of plastic and metal. It comes in blue, and includes the valve and mounting bracket.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking | Ice maker not making ice | Not dispensing water | Ice maker won’t dispense ice
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
177 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
April 16, 2018
Ice maker works but no water out of front. Took apart and actuator is clicking against the electronic part like its supposed to. How can i be sure the issue is the inlet valve before i spend $50 on it?
For model number FFHS2312NS3
Hi Brian,
Thank you for your question. To verify if the water inlet valve is causing the issue, you will need to test it with a multimeter. Before you begin to test your icemaker's water inlet valve, make sure you disconnect the appliance's power supply. The easiest way to do this is to unplug the unit from the wall. Alternatively, you could trip the appropriate switch in the circuit breaker panel, or you could remove the appropriate fuse from your home's fuse box. Consult with an appliance repair technician if you do not feel you have the skill or the ability to successfully complete this test. Locate your icemaker's water inlet valve, it is typically located behind a refrigerator. Gently pull your refrigerator away from the wall. You may want to place scraps of carpet, of some other soft material below the fridge to prevent damage to the floor. Turn of the water valve's water supply by closing the shut-off valve in the waterline leading to the water valve. Remove the lower access panel on the back of the refrigerator using a screwdriver or a nut driver. Place a container under the valve to catch any water that may spill from the water valve and its fill tube. Remove the water valve's fill tubing. Loosen the flare nut on the brass fitting that is found on the inlet side of the water valve. You can use a wrench to loosen the flare nut. Your water inlet valve is held in place on your refrigerator by means of a metal bracket. Use a screwdriver or a nutdriver to remove the screw that holds the water valve's bracket to the refrigerator cabinet. Gently pull the water valve out of the cabinet, and remove the tube from the outlet port. There are two wires connecting to the terminals of your water inlet valve. If yours is a double solenoid water valve, it will have four wires. Be sure to label each wire so that you know where to reconnect them later. Firmly grasp the metal connector of the wires in order to remove the wires. You may need to use a pair of needle-nosed pliers. Do not pull on the wires themselves.
Set your multitester to the R X 1 ohms setting to test for continuity. Place each of the multitester's leads on a terminal. Your multitester should display a reading between 200 and 500 ohms. Closely examine your water inlet valve. The exact ohm resistance rating you should test for may be marked on the valve. If the test you conduct with your icemaker water inlet valve does not produce these results, then you should replace the component. I hope this helps. Thank you and have a great day!
79 people found this helpful.
Was this helpful?
Thank you for voting!
Kory
July 20, 2017
Was having problems with a faulty water valve so I replaced it but now it seems to dispense water every half hour or so without anyone hitting the dispenser. I know if water is leaking out of the icemaker assembly that usually means a faulty water valve but how about out of the water dispenser itself?
Hi Kory, it sounds like you need to replace the diode kit, you can find that here 5303918287. I hope this helps.
46 people found this helpful.
Was this helpful?
Thank you for voting!
Jacques
October 10, 2017
How to test ice water valve or verified ice water valve if its good. Thanks
For model number FRS6R5ESBB
Hi Jacques,
Thank you for your question. You can test the solenoids on your valve with a multi meter. When testing your part, your solenoids should read any where between 500 and 1500 ohms of resistance. If it does not, or if your meter numbers do not shift at all, then you will need to replace your part. Good luck with your repair.
24 people found this helpful.
Was this helpful?
Thank you for voting!
Van
July 20, 2017
My valve is malfunctioning and needs to be replaced. If I order this part, do I need any extra attachments or are there additional parts I should order, or is this it?
Hello Van, no, additional parts are not needed for this repair. Make sure when installing the new valve that the lines are cut flat. Best of luck with this repair!
19 people found this helpful.
Was this helpful?
Thank you for voting!
Ernie
February 18, 2018
Won't dispense water into icemaker. Checked the inlet valve and its pulling about 200 ohms. Also ice maker won't dump ice into the bucket. It seemed to be frozen so i thawed it out and put water in it. Still won't dump ice.
For model number FRS6LR5EW6
Hello Ernie, thank you for your question. It sounds like the water valve is not functioning properly. When testing the valve, your solenoids should read any where between 500 and 1500 ohms of resistance. If it does not, or if your meter numbers do not shift at all, then you will need to replace your Valve. I hope this helps!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Jay
January 14, 2019
The water dispenser will not stop dispensing water after i have stopped pressing it. Also, water is leaking down the back of the inside of the refrigerator at the filter.
For model number FFHS2622MBQA
Hello Jay, Thank you for the question. I suggest checking or replacing the Water Inlet Valve, PartSelect Number: PS7784018. Sounds like it is stuck open and allowing water to flow to the dispenser and overfill the filter causing the leak. Thank you for your inquiry, good luck with this repair!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
January 22, 2019
My ice maker makes ice, but when water is dispensed into the ice tray it overflows into the ice holder then out front of frig. Why is it overflowing?
For model number FFHS2622MYSA
Hello Chris, Thank you for the question. The most common issue would be the water inlet valve becoming stuck open and not closing properly and causing the ice maker to over flow. Sounds like your valve is defective and needs to be replaced. Thank you for your inquiry, good luck with this repair!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Jason
December 3, 2018
Is this made by the original manufacturer? In other words is this "real" or a "knock off" aftermarket version.
For model number 242252702
Hello Jason, thank you for your question. This is a real manufacturer made part. It is not aftermarket, as we don't sell aftermarket parts. I hope this helps.
14 people found this helpful.
Was this helpful?
Thank you for voting!
Laura
December 6, 2017
Water very slow
For model number FGUS2642LF1
Hi Laura, Thank you for the question. The slow water flow could be two things. I would first check the water filter. If it has not been changed in the last 6 months it can cause a blockage and slow water. If the filter is good the water inlet valve will need to be replaced. Hope this helps!
Icemaker assembly is leaking out water. Is that from the icemaker or the water valve not shutting?
Hi Malaya, it does sound like the valve is not shutting off fast enough. We recommend first checking the gear on the icemaker. If it is good then the valve is the problem. Please let us know if you have any further questions.
Repair Tip: Before you begin this repair, make sure to disconnect the power supply to your refrigerator, and the inlet water supply from the back of the refrigerator. Note that this part may look different than the original, but is an authorized manufacturer replacem
Replacing your Frigidaire Refrigerator Refrigerator Water Inlet Valve
How to Troubleshoot a Refrigerator That Doesn't Make Ice
How Does an Ice Maker Work?
How to Troubleshoot an Ice Maker That is Not Working
Test If Your Electrical Part is Failing - Multimeter Tool
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 63 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
water leaking out of refrigerator
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Jose from Alexandria, VA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Wrench (Adjustable)
574 of 666 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
icemaker stopped making ice
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if the maker dumped the ice into the bin.
David from New Bern, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
322 of 370 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water Dripping from through the door water outlet and Ice Maker doesn't make ice.
I had two problems, the first was that water was dripping from the through the door outlet and the second problem is that the ice maker wasn't making ice.
Replacing the water valve was a simple process:
1. Turn off the water to the fridge at the household shutoff valve. 2. Move the fridge away from the wall. 3. Unplug the mains power (AC) plug from the wall power outlet. 4. Remove the 5 screws with a nut driver that hold the cardboard backing off the refrigerator. 5. (This is a great time to vacuum off the coils and underside of the fridge.) Disconnect the water supply from household plumbing with a box end wrench or channel lock pliers. I kept a large plastic cup and rag handy for the left over water in these hoses. 6. Remove the two screws from the water valve bracket on the right hand side and pull the water valve straight back from the fridge and line up the new valve in the same orientation. 7. Remove all the color coded electrical connectors (3 of them) and attach them to the new water valve. 8. Remove the remaining water hoses and attach them to the corresponding connectors on the new valve. 9. Dispose of the old valve and reinstall the new valve in reverse order.
The problem with the ice maker not making ice was because water was flowing so slowly from the valve that it was stopping in the fill tube at the back of the freezer and freezing stopping all water flow into the ice maker. I pulled the fill tube out of the back of the freezer from behind by rotating it 45 degrees counter clockwise and pulling straight out removing the ice blockage and drying the fill tube before I reinstalled.
Since I replaced the valve I had to take the cover off of the icemaker and set the water fill level down (screw toward the minus sign) and then adjusted it by checking the ice after each time it dropped and increasing the fill amount by 1 full turn (roughly 0.7 ounces) until it was just enough to make fully formed ice cubes.
pulled fridge from wall, removed card board cover, unplug the fridge. turn the water off to the fridge. remove the water source from fridge first then remove 2 screws that hold the valve. then the wire plugs. hoses.. they were color coded.
hubert from winchester, VA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench set
92 of 120 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was leaking from the valve/pump for the icemaker
Remove the screws that hold the old valve to the side of the refrigerator. Next, detach each plastic tube and attach that tube to the same place on the new valve, and repeat (there are many valves). Afterward, I realized that many of the plastic tubes had become brittle and had mineral deposits, so I bought additional tubing for ice makers and replaced each tube, one at a time.
Repair was very easy - and to my great delight, they have replaced the old-style compression fittings with PEX push-fittings. You just clip the old compression ring and nut off the tubing and insert the tubing firmly into the fitting. SNAP! VOILA! PEX fittings are the greatest things since sliced bread. I used it to plumb my new house.
Patrick from Georgetown, KY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
67 of 83 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker quit making ice
turned off water supply at water line to fridge. removed two hex head screws @ bottom of rear of appliance that hold the water valve in place. Simply moved color coded elect. plugs from old one to new one, same with water lines. Only difference is, the replacement one I got uses push in water lines and my original was compression fit. No problem though, just cut the nipple off of original line going into new valve and you are good to go. Might want to have an extra 1/'4" brass compression washer though for the one remaining line. Whole process I did on my lunch break at home less than 30 minutes. Only problem though was nothing changed. Spoke with service man over the phone and he said MOST of the time it is water freezing up in the inlet tube top of machine, inside. Remove water line from rear outside on top behind freezer and with a straw try to blow through, if it is froze it will not go through. Mine did not go through. Used hair dryer inside freezer in back on incoming line 5-10 minutes,thawed out, makes ice. Go figure. Changing valves was easy and well described as stated, just not necessary in my case, but now I know. Thanks, Warren in Iowa
Warren from Ottumwa, IA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
58 of 66 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker cycling properly but not getting water on fill cycle
1.Unplugged appliance. Removed rear access panel, turned off water supply valve, removed two screws holding water valve assembly in place. 2. Removed and drained all water lines. 3. Removed three electric solenoid wiring connections. 4.Cut and marked all water lines to facilitate new connecting procedure (instructions provided with the new valve assembly). 5. Inserted the water lines into the new valve by applying a bit of vaseline on tubing end prior to pushing lines into O-ring fittings. 6. Clean the embarassing dust from under the appliance!!!
Note: All lines, wiring, and valves were color-coded to prevent connecting to wrong lines and electric solenoids.
Note: Be sure to remove water inlet supply trough to rear of ice-maker. This tube may freeze solid and prevent water from filling freeze tray. This is done by turning the inlet pipe on the back of the cabinet 1/4 turn and retracting from cabinet.
Terrance from Orland Park, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench (Adjustable)
44 of 50 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water coming out of the ice maker when dispensing water from the door.
This issue was noted in the advice area as being a filter, or valve assembly. But it turned out to be a diode kit that was causing this issue. I don't know why I could not find this issue anywhere on line? When I received the diode kit there was instructions that noted exactly the problem I was having. The fix was easy just a few wires cut and spliced and viola fixed.
kyle from Palo Alto, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
39 of 55 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak
Unplug turn water off Removed two screws with nut driver loosen one Disconnected three solenoid valves Disconnected four water lines Plug tubing in, tighten one flare fitting Reattach wires to solenoids Slide under loose screw, replace two screws Turn water on check for leaks plug in get a drink of water
Russell from Jacksonville, AR
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench set
28 of 38 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
104 Reviews
4.6
Filter By Rating:
5 Stars
85
4 Stars
10
3 Stars
3
2 Stars
2
1 Star
4
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
James G - 17 days ago
Verified Purchase
Easy repair
This part worked great for me
★★★★★
★★★★★
Robert W - 17 days ago
Verified Purchase
Follow video and you’ll have no problem
View video and instructions were easy to follow and I had no problem with installing the valve.
★★★★★
★★★★★
Jon H - April 8, 2023
Verified Purchase
Great service!
Part came quick and worked well.
★★★★★
★★★★★
Erich S - March 27, 2023
Verified Purchase
Easy Repair
The part is working fine. Everything is back normal.
★★★★★
★★★★★
Janet H - November 22, 2022
Verified Purchase
Just what I needed...
The part fit my refrigerator and solved my issue. Saved me a service call and several bucks. Delivery was fast and easy. PartSelect will be my "go-to" source for appliance parts.
★★★★★
★★★★★
Larry B - November 16, 2022
Verified Purchase
Very easy fix. Only took 20 minutes.
Part arrived in timely order. Was packaged well to protect it.
★★★★★
★★★★★
Neil L - May 13, 2022
Verified Purchase
Easy install
Part very easy to install. A little high on price kept it from 5 star
★★★★★
★★★★★
Raymond M - March 12, 2022
Verified Purchase
Very straight forward repair
Received product in a timely manner, instructional video was extremely helpful, literally a 30 minute repair! Thank you PartSelect!
★★★★★
★★★★★
William S - January 6, 2022
Verified Purchase
Easy repair
Patt cane in before scheduling and went in easily. Bought ice maker and both are working great together
★★★★★
★★★★★
James C - December 3, 2021
Verified Purchase
Did not fix our slow water dispenser
Have used PartsSelect for all of my DIY repairs.
Purchased due to our water dispenser being slow. After replacing the water filter this was my next guess.
Parts was exactly like the one I removed.
Install was pretty straight forward, especially with the video. Although 2 of the 4 hoses had a connector crimped on the ends of the hoses, unlike the video, I did not cut those as it suggests.
I suppose I will check for a pinched line, but if that were the case I would assume it would be worn through since the unit is 6 years old. Or maybe this model is just slower than most.
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS7784018
Manufacturer Part Number: 242252702
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
