This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Westinghouse.
Part# 131900200 replaces these:
AP3216008, 941898
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
December 3, 2018
My water inlet valves where i connect the hot and cold water to the back of my washer are not marked hot or cold.How do i tell witch inlet i screw in the hot and cold water hoses
For model number FAHE4044MW0
Hello Tim, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS6012202. Unfortunately the manufacture did not provide information on what port is Hot and what Port is Cold. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. Hope this helps!
Was this helpful?
Thank you for voting!
Antonio
April 6, 2023
Why does my washing machine not stop filling the water drum when it is turned off? What is the problem?
For model number 41727182704
Hi Antonio, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the water level pressure switch, part number PS1150548, to fix this issue. We hope this solves your problem!