Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jan L - August 27, 2018
Verified Purchase
very satisfied
been putting this repair off for a while because I figured it would be complicated to track down the problem. All parts included in this kit insured that whatever the issue was the part was there to fix it.
★★★★★
★★★★★
Robert P - September 27, 2024
Verified Purchase
Easy Repair job
Part was delivered quickly & very easy to install. Ice maker is working great!
★★★★★
★★★★★
Ed G - November 8, 2018
Verified Purchase
Simple
All I did was to replace the ice maker. 3 screws. Done. Over all instructions were well written if you had to do a complete installation.
★★★★★
★★★★★
R. E. M - March 17, 2018
Verified Purchase
my situation is exactly as the example given. it was an easy repair and worked as expected.
again the example given matches my situation the part came very fast and was in excellent condition.
★★★★★
★★★★★
Patrick B - April 16, 2019
Verified Purchase
The parts were received complete and on time.
My appliance is functioning correctly my appliance was 20 years old so I did have some issues with the mounting bracket to the valve on the incoming water line. Other than that it wasn’t a bad install thank you
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 8 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice maker leaked
Removed refrigerator door. Removed 3 screws. Replaced old ice maker with new ice maker. Put in 3 screws. Ice maker working great.
Robert from VINTON, VA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastoc piece holding handle broke; could not control amount of ice it made
removed old ice maker; installed new ice maker
monty from royston, GA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
2 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker not installed in refrigerator
I followed the instructions for the installation of the icemaker and its connection to the house water supply.
Lionel from Watertown, NY
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
4 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker quit working
removed 3 screws.disconnected power connection.removed old ice maker,put new one in.tightened 3 screws.reconnected power plug turned unit on.now makes great ice.
Judy from Newport News, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
7 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacement of Amana ice maker
If you can take the old one out and reverse the procedure, there isn't much more to it than that.
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
2 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
did not have a ice maker
remove parts that were not need installed water valve , ice maker unit and hooked up water supply tested and it works fine. got the parts really quick Thank You
Ralph from Argenta, IL
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
5 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker was not making ice and was noisy
I first removed the icemaker pump and filler tube fron the back of the refrigerator by using an adjustable wrench and pliers. (very simple connection) I went ahead and replaced both items at that time.
Next I opened the bottom freezer and removed the top wire tray and ice container. I removed the bottom nut from the ice maker
... Read more, pulled the electrical plug lose from the freezer connection. I then just lifted the ice maker upward and off the two screws on the side wall and out it came!
I had a little trouble with the filler tube as it came into the freezer. I had to go back and forth to the back of the refrigerator and freezer a couple of times adjusting the tube, so it woiuld clear the inside freezer wall.
This was a very minor problem. I feel like if I had followed the instructions and made sure the tube came through before attaching the icemaker it would have worked like a charm!
What I really liked, was everything was in the box for the job.
Read less
Edgar from Fredericksburg, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
4 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Molly
March 25, 2018
Does this come with a power cord? If not, where can i purchase one on partselect.Com?
For model number IC6
Hello Molly, Thank you for your inquiry. This kit comes with all the parts of the icemaker needed to install including the harness from the icemaker to the back wall of the freezer where it connects to the refrigerator harness, the mounting screw and clips, the water line and the tubing along with the icemaker and the water valve. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Suzanne
January 2, 2019
My refrigerator never had the ice maker kit. Do i need any other parts other than this to install? Does it come with the ice bucket and water lines?
For model number BC21VW
Hi Suzanne,
Thank you for your question. This kit is not listed under your model number. If you have never had an ice maker set up in your refrigerator before, you will need the ice maker, ice bucket, water tubes and the water inlet valve if it is not already been hooked up. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Donia
February 20, 2023
Does this kit fit this model refrigerator?
For model number ARB2117AC
Hello Donia, thank you for your question. The Icemaker for ARB2117AC is PS2121513. We also have a video for your view for installation information. We hope to hear from you soon.
Hello Ira, thank you for reaching us out. First, you may need to check the ice maker wiring harness is operational, and are connected together. If this is not the issue, then you may need to replace the add-on icemaker kit. We hope it helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
