Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kathi
January 29, 2019
If i purchas the assembly cooktop for my samsing range is it hard to install Samsung range fe710drs
For model number fe710drs
Hello, thank you for your inquiry! To replace the cook top, you will need to begin by removing the back panel. There are screws going around the perimeter. Once this is done, you lift up to pull it out, and repeat the process with the top panel. You will then need to remove the screw that holds in the ground wire, then unplug the main molex, remove the strain relief and slide them in. You will then need to disconnect the molex's on the other side and slide them through as well. You can then move to the front and remove the screws that will be under the lip when you open the oven door. With the screws removed, lift up and pull out on your cooktop, and you will have it removed. You will need to transfer the elements to the new cooktop, and then revert the process to put the new cooktop in. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
