Can be used on either Fresh Food or Freezer side of the refrigerator.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator Upper Hinge Bearing
Troubleshooting
This part fixes the following symptoms:
Clicking sound | Door won’t open or close
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Electrolux.
Part# 240328404 replaces these:
AP2115813, 891006, 7240328404
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Nidiana V - April 27, 2018
Verified Purchase
Hinge
I didn't need it
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Refridgerator door would not 'self close' anymore and made a clicking sound
-Analyzed the symptoms, consulted your website -Found where a clicking sound could be symptomatic of the problem -Consulted the diagrams of the refrigerator for possible parts -Ordered the parts listed as probable problem causes -Received parts in a few days -Removed door as your website recommended -Install
... Read moreed upper door bearing as a preventative action as it was OK. -Installed the lower hinge bearing and door closing cam. -Lubricated both upper and lower bearings w/ silicone grease. -Reinstalled fridge door & tested the door closing action -Worked like a champ and only took about 1/2 hour! Thanks!
Removed the trim screw on top of the door then removed the two hinge bracket bolts. lifted the door off placed on the table. Remove the two screws on holding the bearing bracket on the bottom of the door. removed the bearing and replace with the new one. Reinstalled in reverse order.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
April 25, 2018
How do you remove the upper hinge bearing from a Frigidaire refrigerator door? It has spurs on the bottom that are not accessible preventing its removal. Thanks.
Hi Steve,
Thank you for your question. You have to break the rim off of the bearing and then push in the upper edges of inside your bushing. Then with a pair of pliers you just pull the part out of the door. You will have to use quite a bit of strength to pull the part out. Make sure to be careful of your wiring as well. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Alvin
April 21, 2018
My door does not close by itself like it used to. Will this upper hinge bearing replacement solve the problem?
Hi Alvin,
Thank you for your question. It could be the part you would need to change. You might also have to look at any cams you might have an your hinge itself. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.