The Bottom Door Bin is also commonly known as a "cantilever shelf" is a clear plastic drawer which holds items in the bottom area of your fridge's interior, on the door. This OEM part is very easy to install and will not require any tools, you will just need to snap the mounting tabs into place for removal and installation. If damaged you will notice visible damage or have problems holding items in the fridge. If damaged, it should be replaced. Check your model number and user manual to see if this is the right part for you. This is important, as many fridges use multiple door bins, many of which vary slightly. This part is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Noisy | Touchpad does not respond | Ice maker not making ice | Door won’t open or close
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Teddy
July 20, 2017
Is this part interchangeable on my fridge? I need two door bins can I just order two of these?
Hello Teddy, you will need to order 240323002 for the lower door bin and 241808205 for the upper door bin. Unfortunately, it is not the same part and you will have to order two separate parts to replace the ones you are missing. Please let us know if you have any further questions.
27 people found this helpful.
Was this helpful?
Thank you for voting!
Joline
July 20, 2017
I’m about to install this part and I’ve never done it before, do you have any suggestions?
Hi Joline, be careful not to put too much stress on the tabs to fit them into the molds in the door, they should simple just snap in place. Other than that, you should have no troubles! Best of luck with this repair.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Danny
October 8, 2017
I need to order a replacement door bin, what is the part number for this particular model.
For model number FGSS2635TF0
Hi Danny,
Thank you for your question. It depends on which bin you are looking for. You have two different types of bins on your refrigerator side door. This bin is on the bottom half of your door. I have attached the top bin in a link down below for you. Good luck with your repair.
I would like to add an additional bin to my door of the fridge. Which bin would I choose?
For model number FGHS2631PP4A
Hello Debbie,
Thanks for your question. Your fridge has two bottom door bins, part number PS429725, and two gallon door bins, part number PS1560537, which are above the bottom ones.
I hope this helps.
Hello. I need the two middle bins for my fridge. Can i just order two of these? And my fridge's model number is lfus2613le3. Will these work for that model?
Hello Lisa, thank you for your question. There are 4 bins in total on the inside of the fridge door, and these are the the bottom two. They will work on the bottom two spots on the fridge door for you model. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Carol Scarbrough
April 21, 2018
I am needing bins for the refrigerator door. The bottom two can you please help me with this?
For model number FRS6LF7JS3
Hi Carol,
Thank you for your question. The part number listed under your model number for the 2bottom refrigerator door bins is PS429725. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
TJ
July 20, 2017
This is the bin I need for my model but it looks different, is this not an original equipment manufacturer replacement part?
Hello TJ, this refrigerator door bin 240323002 is meant to replace various white versions that were used on some models. Although it is clear it is the part you need, and is an OEM replacement part. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Elliot
August 16, 2017
I need the lower door bin and the bin directly above it. Are they the same part? Thanks
For model number GLHS65EHSB4
Hi Elliot,
Thank you for your inquiry. They are actually two different parts. This part is your lower door bin, I have attached a link below with the information for your upper door bin. Good luck with your repair.
Do you sell the bottom door bin? How much cost and whats the shipping cost to zip code 06902 ?
For model number FPHS2687KFO
Hello Maria, thank you for your question. Yes, the bottom door bin on the fridge door is Bottom Door Bin Part Number: PS429725. We have three shipping methods available for shipment anywhere in the US. You can see these options when you add the part to the cart to place your order! I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gui
August 7, 2018
Could you please tell me if the bottom bin door 240323002 fits the model fphs2687kfo?
For model number FPHS2687KFO
Hello Gui, thank you for your question. Yes, the part number 240323002 will fit on the bottom section of the fridge door for model number FPHS2687KF0. Good luck with your repair!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Tab on bottom door bin broke off
Replaced bottom door bin being careful not to put stress on the tabs to fit into molded area in door.
Mark from Redlands, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
536 of 561 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced door shelve
We live in rural SW Missouri, so I am very dependent on the internet. I found PartSelect on a Google search and simply inputted the modle number and serial number for the refrigerator and there it was. I was able to order the right part the first time and repair the refrigerator myself! No serviceman needed here!
The website was easy to navigate. Loved the schematic drawings of the appliance, it made it easy to find the part you are looking for without the guesswork (part names are sometimes not intuitive). My parts arrived promptly, the price was competitive, everything fit beautifly as expected. Would recommend this merchant, will shop there again. THANKS !
No tools needed. Just had to slide the bin into place. HOWEVER, the bin has a jig-jagged style plastic groves on each side that need to be slide carefully into place. I couldn't get the orginal bin out in order to wash it. It looked easy - just slide it up and out of place, but when I did that the back, inter-locking pieces cracked off. I believe this is a terrible design and the bin should be replaced at the manufactures cost! The other bin slide in there with some elbow-grease. Good Luck!
Richelle from New Berlin, WI
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
168 of 249 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken shelving in Frigidaire Gallery side by side refrigerator and broken shelving in White Westinghouse/Frigidaire refrigerator
I snapped off the old, broken parts of the shelves and in the side by side fridge, I just popped on the new shelf. In the White Westinghouse freezer on top fridge, I had to remove (it snapped right off) the broken side shelf retainer bar end cap from the fridge and remove the broken piece piece of plastic from existing shelf retainer bar end cap that was stuck in the retainer bar. I used a letter opener to help get it out. Then I snapped the new door shelf retainer bar end cap into the bar, and snapped the bar end cap back to the door. Both repairs took less than 5 minutes..........and I am a female who isn't very handy!!
The repair was not my worry, but ordering the correct part. I was so pleased with this web site and the quick delivery of the part that I ordered. I easily found the bin I needed for my refrigerator and had the part at my doorstep with two days. I am extremely happy with this site.
Elizabeth from San Diego, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
83 of 148 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had a broken door bin and shelf support stud
I pulled out the old support stud with a pair of pliers, pushed the new stud in, and gave it a few taps with the hammer to secure it in the fridge wall. For the door bin I just slid the new bin in place.
Hinge bearing broke causing door to rub when opened
I removed the screw in the plastic cover on the top of the fridge that covered the fridge side hinge first. Then, I removed the two nuts with a nut driver that hold the hinge in place. After removing the two nuts and the hinge, I lifted the door up and out of the bottom hinge and placed it on a flat surface. I used a pair of pliers next to pull out the broken hinge bearing from the bottom of the door itself. After removing the old bearing I inserted the new bearing in the door. Next, I put the door back on making sure the hinge went into the hinge bearing and put the door in the closed position. After that was all done and the door was set properly, I put the top hinge back on with the two screws and put the plastic cover back in place. Took 20min to complete. A second set of hands would have been helpful with putting the door back on, but it can be done by yourself.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lawana R - January 8, 2022
Verified Purchase
easy repair
Fit was perfect and it popped right in
★★★★★
★★★★★
Judith H - November 30, 2021
Verified Purchase
Fridge door bin received
I received this botom door bin quickly and it fits perfectly. Thank you for your great user frendly website. Wish it wasn't so expensive but it's great not to have a taped bin in my fridge and your website represents the products in a very exacting way that made me feel confident of my order.. I appreciate it!
★★★★★
★★★★★
Karen M - November 3, 2021
Verified Purchase
Perfect fit
Part arrived quickly. Fits perfectly!
★★★★★
★★★★★
Maryanne B - October 31, 2021
Verified Purchase
Quick Service
Part arrived very quickly. Only concern was the way the tray fit on the hinge part. Appeared to be a bit too large for a snug fit. Otherwise, product appears to be heavy-duty.
★★★★★
★★★★★
Jamye E - October 27, 2021
Verified Purchase
Correct part
The part was correct and came quickly.
★★★★★
★★★★★
Jimmey T - October 20, 2021
Verified Purchase
Door ben
Great fit,easy install great product
★★★★★
★★★★★
Rolinda B - October 19, 2021
Verified Purchase
Easy to install
A little flimsy but it works
★★★★★
★★★★★
Thomas B - October 5, 2021
Verified Purchase
replacement shelf
the part arrived in new packing, however the exact same part on Ebay was under $20.00, I should have looked there first/ but it works very well
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout