Part Location Diagram of 154365401 Frigidaire Lower Drain Impeller
See part 12 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Lower Drain Impeller 154365401

Rated by 5 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 27.95
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS420969
Manufacturer Part Number 154365401
Manufactured by Frigidaire
Product Description

Lower Drain Impeller Specifications

This part helps push the water towards the drain port. Part may differ in appearance, but functions same as original.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, Frigidaire.
Part# 154365401 replaces these:
AP2109488, 890308
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.7 / 5.0, 5 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Noisy pump.
Removed the rack out of dishwasher. Removed sprayer by removing 4 screws. Removed cover to pump propeller assy.by just lifting up on the cover. Then you remove 4 screws from the pump cover. Remove the propeller. Pull up on shaft and seal. Then when you replace everything just reverse the directions.
Other Parts Used:
Motor Seal and Sleeve Kit Lower Drain Impeller
  • kenneth from CAMBRIA, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drain impeller broke
took assembly apart down to the impeller. Worst part was getting the broken part of the impeller off of the pump shaft. With long nose vice grip plyers it was easy. Drawing is a bit confusing.
  • peter from snoqualmie pass, WA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher wouldn't drain
Took out basket. Removed spray tower assembly and plate at bottom. Lower impeller was stripped so won't push water through drain and part of impeller was still stuck on shaft so had to pull off with pliers. Removed old impeller and put new one on and assembled in reverse order - drains great now!
  • Ryan from Saint Paul, MN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable)
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher would not drain.
First I removed the spray tower. Then removed the spray impeller. Next there was a plate I removed. Under this plate was the lower drain impeller which was stripped out and would not engage the drive shaft.
  • David from Sharon Center, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lower impeller froze to housing and sheared off at shaft - lack of use caused this problem
Removed: tower and spray assembly, pump housing cover, volute cover, nylon retainer, lower impeller, sleeve and seal assembly. Replaced the sleeve and seal assembly and then the impeller. Reassembled. The small, square hole, nylon retainer was not shown in the diagram and it took me a while to recognize that it had to slip off the shaft before the broken impeller and sleeve and seal assembly could be removed. That was the trick.
Other Parts Used:
Motor Seal and Sleeve Kit Lower Drain Impeller
  • jerry from geneva, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable)
21 of 41 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Be the first to ask our experts a question about this part!

You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS420969
Manufacturer Part Number: 154365401
Brand
Model Number
Description
Kenmore
58714242100
Dishwasher
Kenmore
58714249991
Dishwasher
Kenmore
58714432200
Dishwasher
Kenmore
58714432201
Dishwasher
Kenmore
58714432202
Dishwasher
Kenmore
58714439200
Dishwasher
Kenmore
58714439201
Dishwasher
Kenmore
58714439202
Dishwasher
Kenmore
58714538400
Dishwasher
Kenmore
58714538401
Dishwasher
Kenmore
58717242100
Dishwasher
Kenmore
58717245991
Dishwasher
Kenmore
58717248400
Dishwasher
Kenmore
58717248401
Dishwasher
Kenmore
58717252200
Dishwasher
Kenmore
58717252201
Dishwasher
Kenmore
58717252202
Dishwasher
Kenmore
58717259200
Dishwasher
Kenmore
58717259201
Dishwasher
Kenmore
58717259202
Dishwasher
Frigidaire
FDR251RJR0
Dishwasher
Frigidaire
FDR251RJS0
Dishwasher
Frigidaire
FDR252RBB0
Dishwasher
Frigidaire
FDR252RBB1
Dishwasher
Frigidaire
FDR252RBB2
Dishwasher
Frigidaire
FDR252RBS0
Dishwasher
Frigidaire
FDR252RBS1
Dishwasher
Frigidaire
FDR252RBS2
Dishwasher
Frigidaire
FDS251RJR0
Dishwasher
Frigidaire
FDS252RBS0
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service