Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Phil
March 2, 2023
I have the error code book but I'm getting an error code E41. I looked it up via other means and it's stating that the controller board has failed. Prior to this code I got the code E66 for faulty thermal limiter. I replaced all of the thermals (inlet and outlet) along with the thermister. when I turned it back on I ended up with the E41 (that's not even listed for this model) HELP?
For model number FSAG7021MW3
Hello Phil, thank you for reaching out. Error E41 implies a door lock failure. Check your door switch with a multimeter for a continuity test. If the door switch, part number PS2330880, fails the continuity test, you need to replace it. If the door switch is okay, you may need to replace your electronic control board, part number PS9865104. We hope this solves your problem!
Good Day Calvin. Thank you for your question in regards to your unit (Model Number FASE7021NW2). The E61 error code indicates a heater relay failure. This could mean that there are wiring issues in the main control board or that the control board has to be replaced. Hope this helps. Best Regards.
Was this helpful?
Thank you for voting!
Van
February 10, 2020
E61 error code dryer stops after a few minutes of drying
Recommendation?
For model number FASE7021NW2
Hello Van,
Thank you for your question. The E61 error code means the heating relay is stuck open or closed, or there is a wiring defect. We suggest inspecting the heater element under part PS2349309 for your model and the wiring's attached to see any visible defects, to see if they need to be replaced. We hope this helps.