Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
November 6, 2019
The dishwasher starts, runs for a few minutes and then stops after 3-5 minutes with flashing start and washing lights. Then you have to cancel and restart two or three times to get the dishwasher to start and finish a wash. So far it does not take more than three cancel and restart attempts. Does this sound like a control board problem? Does the part come with instructions to install?
For model number WDF750SAYW0
Hi John,
Thank you for your question. If the dishwasher is not starting as it should, the electronic control board is one part that you will need to check. There are 2 electronic control boards behind the control panel and you should check both boards and the connections between them to see if it is one of these parts that is causing the issue. If the door latch is not working as it should, this may cause an issue with the dishwasher not starting correctly. If you test these parts and they are working correctly, here is a link from our website that you may reference on what other parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=WDF750SAYW0&mfgModelNum=&fkMfgID=3&ModelMasterID=347985&PID=40. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Al
October 4, 2023
Getting no water, tested door switch, float switch and water valve all test good water valve flows when actuated with power what would be my next item to check?
For model number WDF 750 s a y w1
Hi Al, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the water inlet port for any clogging. If this is not the issue, you may need to replace the control board, part number PS3651435, to fix the issue. Glad to be of help!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
