Part Location Diagram of W10479763 Whirlpool CNTRL-ELEC
See part 7 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

CNTRL-ELEC W10479763

 Fits your WDT710PAYM0!
$ 220.87
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your WDT710PAYM0!
PartSelect Number PS3651434
Manufacturer Part Number W10479763
Manufactured by Whirlpool
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool.
Part# W10479763 replaces these:
W10352584, W10440214, W10461368
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

3 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Edward
November 26, 2018
When I press 1 hour wash and start button it blinks and doesn't start. If I reset circuit breaker it will start. What's the cause?
For model number WDT710PAYM0
PartSelect logo
Hello Edward, Thank you for the question. This sounds like an issue with a faulty control board, PartSelect Number PS3651434. The board is not repairable unfortunately, so it will need to be replaced. Hope this helps, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Scott
March 24, 2020
When starting the dishwasher it begins the initial cycle. You can hear the water running the door for the pod opens on the inside and it will run for several minutes putting water in the dishwasher then it stops and starts to drain all within about a five minute. And never cleans the dishes.
For model number WDT710PAYM3
PartSelect logo
Hello Scott, Thank you for your question. Our sources suggest replacing the electronic control board under part PS3651434 for your model to fix the issues. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Jeff
October 28, 2017
We are unable to select different buttons on the control panel, it started off with not being able to select heavy, now we are are down to only being able to select eco to run the dishwasher.
For model number WDT710PAYM3
PartSelect logo
Hi Jeff, Thank you for your inquiry. If the touchpad is not responding you will need to check both the touchpad and the electronic control board to see which part is causing the issue. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3651434
Manufacturer Part Number: W10479763
Brand
Model Number
Description
Whirlpool
WDT710PAYB0
Dishwasher - Undercounter
Whirlpool
WDT710PAYB1
Dishwasher - Undercounter
Whirlpool
WDT710PAYB2
Dishwasher
Whirlpool
WDT710PAYB3
Dishwasher
Whirlpool
WDT710PAYE2
Dishwasher
Whirlpool
WDT710PAYE3
Dishwasher
Whirlpool
WDT710PAYH2
Dishwasher
Whirlpool
WDT710PAYH3
Dishwasher
Whirlpool
WDT710PAYM0
Dishwasher - Undercounter
Whirlpool
WDT710PAYM1
Dishwasher - Undercounter
Whirlpool
WDT710PAYM2
Dishwasher
Whirlpool
WDT710PAYM3
Dishwasher
Whirlpool
WDT710PAYW0
Dishwasher - Undercounter
Whirlpool
WDT710PAYW1
Dishwasher - Undercounter
Whirlpool
WDT710PAYW2
Dishwasher
Whirlpool
WDT710PAYW3
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service