Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kirk
May 20, 2019
Trying to fix defrost error. Will defrost sensor 6615jb2005n fit my fridge.
For model number LFX28968ST/01
Hi Kirk, thank you for your question. Yes, this is the part that you are looking for according to your manufacturer and the model number provided. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Josephine
December 31, 2023
I'm about to replace this part though not sure it will fix the problem. Neither the freezer nor main compartment are cooling. The compressor and fan are "working" but the evaporator fan is not running. Coils have been cleaned. I put the fridge in test mode from the electrical panel and the evaporator fan went on. I'm thinking this all points to the temp sensor. Any other suggested troubleshooting?
For model number LFC25765ST
Hello Josephine, thank you for reaching out. If the evaporator fan runs in test mode, it means the main control board is faulty and is not sending the voltage to the fan. You need to check the main control board PS3625170. This can be checked with a multimeter. We hope this solves your problem!
I think I dislodged defrost sensor when cleaning defrost drain- freezer doesn’t go below 23 and ref not below 42.
Could dislocated sensor cause this, and where does it get reattached to coil?
Thanks very much!,
For model number LFX28979SB
Hello Mark, thank you for contacting us. Yes, a dislodged defrost sensor can affect the cooling performance of your freezer and refrigerator. The defrost sensor is responsible for monitoring the temperature of the evaporator coils and ensuring that they do not freeze over. If the sensor is not properly attached or is malfunctioning, it can lead to improper defrost cycles, causing the temperature to rise. The defrost sensor assembly, part number PS3636324, for your model is attached to the right side of the evaporator coils. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
MARWAN
December 13, 2018
There is error f5
For model number 795.72043.112 SR#305KR00565
Hello Marwan, thank you for your question. That error code may be related to an issue with the freezer sensor. It has gone bad or has been disconnected. We would recommend checking the freezer sensor to be sure the wire is connected securely and if it is replacing the PartSelect Number PS3531167. I hope this helps!
Was this helpful?
Thank you for voting!
Don
April 10, 2023
I have a Kenmore Bottom Freezer Refrigerator. The Er dH error has come on. I believe the problem is defrost control. Hoping that this is the right part for that problem and refrigerator.
For model number 795.7160
Hi Don, thank you for reaching out. The error code ER dH usually indicates poor defrosting. We would suggest resetting the unit by turning it off and plugging it back in after 5 minutes. If the issue remains, the problem might be with the defrost sensor, part number PS3529165. We would recommend checking this sensor for continuity using a multimeter. We hope this helps!
Hello,
My fridge Kenmore, model 795.73133.410 has both freezer & refrigerator very warm, about 60 degrees. I found both supply fans, compressor came on for about one minute then stopped. Condenser fan was running constantly. I unplugged then plugged it back, same thing happened.
Is the problem at the defrost sensor?
Please help!
Thank you!
For model number 795.73133.410
Hi Minh, thank you for your inquiry. We have concluded that the issue is with the compressor overload protector, part number PS3603394, as it is most likely faulty and may need to be replaced. We hope this is helpful!
