This is a lower shelf frame. You may also know it as a refrigerator door cover. This part is the frame only, as the glass is not included. The frame is white and measures about 33 inches wide, and 18 inches long. To install this part, note that you will need your original rollers and screws, or you will need to purchase new ones. This piece has rail brackets that are located underneath the cover, which will allow the drawer to slide in and out on the rails.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close
This part works with the following products:
Refrigerator.
This part works with the following products:
LG.
Part# 3550JJ0009A replaces these:
AP4436945, 1266790, 3550JJ0009A, 3550JJ0009A
Customer Reviews
Average Rating:
★★★★★
★★★★★
11 Reviews
4.6
Filter By Rating:
5 Stars
10
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
1
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Patti C - March 22, 2022
Verified Purchase
Parts fit perfectly.
The parts fit into place easily and now my refrigerator looks new.
★★★★★
★★★★★
Doug H - November 1, 2021
Verified Purchase
Easy repair.
Arrived quickly and just as advertised.
★★★★★
★★★★★
Robert L - October 22, 2021
Verified Purchase
easy repair
fit great.
★★★★★
★★★★★
James O - November 14, 2020
Verified Purchase
great product
Fit perfectly, fast shipping. Great seller
★★★★★
★★★★★
Morris R - May 9, 2020
Verified Purchase
Piece of cake
First off the item was very well packaged and was perfect coming out of the box. Must've took someone a few minutes or more to ensure shipping was no problem. I didn't see any directions or look for a "help" video because it's a simple replacement. Changed out all the accessories (doors, inner frames, and glass) and it's a perfect fit. Total time was about 30 minutes, because I washed all the old parts before assembly. Made me a believer!!! 5 Stars!!!!
★★★★★
★★★★★
Elizabeth M - September 27, 2019
Verified Purchase
Didn't fit
Came in good shape and came fast but did not fit,
★★★★★
★★★★★
James E - May 16, 2019
Verified Purchase
medium repair should have been easy, but trial and error hindered
the part was as ordered, even came with an improved feature to help prevent what happened to the original
★★★★★
★★★★★
Gregory N - December 10, 2018
Verified Purchase
Still sinks and sags
Sunk in middle, same as old shelf. The shelf part is good. The shelf design is not.
★★★★★
★★★★★
LYDIA S - October 31, 2018
Verified Purchase
Broken shelf
It was very easy to install. No instructions needed. It kept me from buying a new fridge.
★★★★★
★★★★★
Beth K - August 12, 2018
Verified Purchase
Shelf frame
Quick delivery. Perfect fit!
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Food off top of shelf, drawers come out, glass tops come off, lift the whole unit up (can be a little heavy. Tilt sideways to angle past doors (remove door's lower bins as needed by removing food and lifting up). Turn upside down, remove 3 screws from metal rod and remove metal rod (may require prying out with screwdriver). Remove texture
... Read mored plastic top pieces from each side; some flexing is required to get one side up, then the other. Remove two hinged drawer covers by pinching in at their hinge points.
This is your last chance to clear all the walls, floor, and ledges at the bottom of your fridge. Just sayin'.
Put new shelf upside down on counter. Transfer metal rod to new shelf, screw it in. Transfer hinged drawer covers. Transfer textured plastic topic pieces, again putting one side (of each) in first and flexing unit a little to get other side in. Turn right side up and angle back into refrigerator.
Bring shelf flat and push to the back of the refrigerator until it is flush with the back. Lower whole unit until it rests on top of the side rails where drawers slide in. Left side has a tongue that will fit into a 2" or so notch near the front, right side will rest on top of a round bumper. Front coldness control should still operate smoothly. Put drawers in to make sure they glide and close smoothly. Put glass shelf on top and press down lightly to make sure lower shelf is stable and glass fits neatly into its plastic frame. Replace any door bins you removed.
Ta da!
Read less
John from Mountain View, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grams had cracked in front
Super easy. Removal of old shelf and 3 screws was obvious how to put in new shelf. Thank you. Excellent cost, delivery and ease of transaction.
Milton from WILTON, ME
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken lower shelf frame and crisper drawer fronts had cracked
Removed screws and the plastic shelf tops from the broken shelf. These parts are sold separately. Do NOT throw anything away until you know you have what you need. Gentle pull the shelf to spread it enough to get the plastic pieces in. This is the only hard part. Screw the slides onto the new frame. Snap the covers into the crisper
... Read morefronts. You’ll want to force them in but don’t. They will snap and break.
Be sure to keep all the parts from the old frame because, first, you have to attach the metal stiffener/support bar from the old to the new. Care is necessary trying to fit the upper pop-up drawer doors and the clear plastic drawer tops to the frame. The hinges of the door top are plastic and could break, causing you to have order another
... Read more part. The clear plastic tops, under the glass the shelf, do not fit intuitively and you have to make sure they fit in the right direction. Along one edge is a 1" square spot; that goes to the back of the frame. Then, you need to be careful snapping them into place so you don't break the supports. Once you have all the parts on in the right places, then it's just a matter of sliding everything into place in the refrigerator.
Read less
Roger from ORLANDO, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Track for Vegetable drawer cracked off at the end causing drawer to drop rather than slide out.
Lower shelf frame lifted right off w/o the use of any tools. Removed both drawer cover fronts.The glass shelf which sits on top of frame over time will tend to stick to shelf frame. Running Hot water over glass dissolved stickiness and glass separated easily.Do Not try and pry apart if it seems stuck to shelf frame!. It may crack!. Cleane
... Read mored all parts, and replaced both drawer front covers. Put shelf frame back in on shelf holder. Done. Approx.20 minute repair w/o any problems.
Read less
Dennis from STRONGSVILLE, OH
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
8 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
December 9, 2017
In your description you state dimensions about 33" x 18". I measured mine and it is 31" x 16.5". How accurate is your "about" dimensions?
For model number LFC25760ST
Hello Joe, Thank you for your inquiry. The part is held up against a grid of one inch squares and measured from the outside edges of the part. I have double checked and it does measure 33 inches by 18 inches. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Geraldine
July 16, 2021
I need the frame for the glass shelf and the rollers that the vegetable bins slide onto measures 31”x17” is it available?
For model number LFC25760ST
Hi Geraldine,
Thank you for your question. The part number listed under your model number for the shelf frame is PS3519990. The part number for the roller is PS3618453. If you would like to place an order for these parts, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
I cannot find my model # in your list of models. Closest was lrfd2850tt. Will these parts fit my refrigerator?
For model number LRFD22850TT
Hello Maria, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3520002. Thank you for your inquiry, good luck with this repair!
I need to replace the lower largest shelf in the fridge. I think I need part PS3519990 (the glass parts are fine). Is this the part that supports the metal bar at the front? It holds up the crisper drawers?
Thank-you for your help.
Colleen
For model number LRFC25750SW
Hello Colleen, thank you for contacting us. According to our research, this is the right part that you are looking for. This part is a lower crisper shelf frame that is used on refrigerators with a freezer at the bottom of the unit. This part includes the rails that hold the crisper drawers that are located below the lower crisper shelf frame. The crisper drawers slide along these rails, too. Please reach out to customer service if you need help placing an order. Glad to be of help!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Teresa
July 31, 2017
How does the plastic trays attached
For model number LRFD25850TT
Hello Teresa,
Thank you for your question. Looking at the diagrams it shows the shelf sits on the side rails that attach to the inside wall of the appliance.
I hope this helps!
Was this helpful?
Thank you for voting!
Alex
April 19, 2023
Hello ,
What is Crisper Drawer Cover Frame part number for my LG LFC24786ST
For model number LFC24786ST
Hi Alex,
Thank you for your question. The part number for the crisper shelf frame is PS9495758. We hope this helps!
Even tho you say that this is the part I need, my measurements are different then yours. Will it still work?
For model number LFC25760ST
Hello Geraldine, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3519990. It is best to go with the model number and not the dimensions listed as the dimensions are based off a 1" grid shown in the picture for an estimate. The model number will only list the parts guaranteed to fit your appliance. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
