Holder Assembly,Locker 3501W1A019D
Fits your 80043!
★★★★★
★★★★★
Rated by 4 customers
Really Easy
30 - 60 mins
Ratings submitted by customers like you who bought this part.
Fits your 80043!
PartSelect Number PS3519053
Manufacturer Part Number 3501W1A019D
Manufactured by
LG
Troubleshooting
This part fixes the following symptoms:
No heat | Won’t turn on
This part works with the following products:
Microwave, Range, Wall Oven, Microwave Oven Combo.
This part works with the following products:
LG, Kenmore, Amana.
Part# 3501W1A019D replaces these:
AP4436481, 3501W1A016M
Customer Reviews
Average Rating:
8 Reviews
★★★★★
★★★★★
4.6
Filter By Rating:
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ron B - October 11, 2023
Verified Purchase
Part was a direct replacement.
It took me longer to remove the microwave over the stove than it did to replace the switch assembly. It resolved my problem!
★★★★★
★★★★★
William M - October 29, 2021
Verified Purchase
LG Microwave would not heat!
This part that I ordered came fairly quick. Lately the Mail has been slow but not PartsSelect fault. I had originally just ordered the switches but found that trying to replace just the switches was NOT easily going to be done. They don’t just pop out of the latch unit.
Replacing the entire part was easier and the repair was made. This solved the problem where the Microwave would not turn on to heat! Timer would count down, turntable would NOT turn as well.
I have never ordered parts from here before but my appliances are getting old now and I will be counting on PartsSelect for future repairs.
I like the fact that they have a Problem Solving DataBase to reference. And they are pretty much on target as to what the problem could be and what the repair could also be as well.
Thank You PartsSelect
★★★★★
★★★★★
Peter S - March 14, 2021
Verified Purchase
replacement was good. Great Service
The first unit was bad. The replacement was good. Great Service
★★★★★
★★★★★
Dennis B - May 1, 2019
Verified Purchase
Simple fix. Part works very well.
Repair took minutes and my microwave is 10-8.
★★★★★
★★★★★
Mary L - December 8, 2018
Verified Purchase
great service
The service and speed was great but, the parts they make for these products are cheap and short lived. That is why I ordered two.
★★★★★
★★★★★
Jim B - November 24, 2018
Verified Purchase
did not fix
although it said this would fix the problem 98% of the time I was in the other 2%. the part wasn't that bad to install but I wasn't going to keep throwing parts at it
★★★★★
★★★★★
Peter D - August 11, 2018
Verified Purchase
Exactly what I looked for
Works great so far
★★★★★
★★★★★
Mary L - March 14, 2018
Verified Purchase
worked great
Everything was easy and worked out perfectly.
- < Prev
- 1
- Next >
Back to Top
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 4 reviews.
What's this?
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
food does not get hot, carousel did not turn, all other indicators worked
Read the troubleshooting section on this site. Figured it was an interlock problem because the food was not getting hot (magentron not turning on) and the carousel was not turning. Did not think both the carousel motor and magnetron failed at same time, thus indicated an interlock problem. The interlock switches are actuated by the door
... Read more
latch. Replaced the assembly locker piece with all three switches (only a $20 dollar part) and microwave was fully operational again. Wife and kids think I am a hero.
Read less
-
John from SEVERN, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave not heating, everything else works
Not knowing which of the switches to replace I ordered all three in the assembly. Replacing the full assembly was easy, first unplug the microwave. Then remove the top cover to access the screws that hold the control panel in place and let the control panel hang. There are two screws that hold the assembly in place - remove those. I u
... Read more
sed needle nose pliers to pull the wires off of the switches and immediately put the wires on to the new assembly so there was no confusion on what wire went where. Place the assembly back in position, replace the two screws to hold it in, put control panel in place and secure screws. Replace top cover and plug in.
Read less
-
Barbara from Philadelphia, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not start.
diagnosed defective 'door-shut switch' in the switch holder assembly. rather than replace switch, replaced entire locker holder assembly which made for a very simple and easy repair...not to mention very inexpensive.
-
James from VIRGINIA BCH, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
8 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the switches in a component that door activates when shut.
I replaced the whole component with all three switches in it even though only one switch was bad . Taking out one switch out of the holder unit would probably have damaged the unit that was holding the switches. Easy install and it works great again .
-
Jimmy from OZARK, MO
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
9 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Apryl
April 23, 2019
The microwave comes on when we open the door (but still works when door is shut). It looks like this part comes with all 3 switches (and i gather that the likely reason we have the problem is that one of the switches is not functioning properly?). If i were to get this part, how easy is it to install? The 2 "instructions" just say that it is "very easy" but don't indicate how actually to do the installation.
For model number LMVM2075SW
Hi Apryl,
Thank you for your question. The switches do come with the locker holder assembly. We do not have the exact specifications on installing this part, but here are some instructions on installing a microwave switch, that may help you with this. "Before you begin any repair please unplug the appliance from the electrical outlet. Use a Phillips head screw driver to unthread the screws securing the grill. With the screws removed, open the microwave oven door then the slide the grill to the left and lift it up to remove. Next remove the control panel mounting screw then lift the control panel up to detach. Then remove the screw holding the inner access panel and then release the panel from the retaining clips. Now remove the screws holding the switch assembly. Depress the release tab and the actuator to detach the switch you are replacing. Disconnect the wire connector to fully release the old switch. Install the new door switch by first connecting the wire connector. Now position the new switch in the assembly snap it into place. Realign the switch assembly on the frame and secure it with the screws. Reinstall the inner access panel securing it with the screw. Now insert the control panel tabs to the slots in the frame and push the panel down. Secure it with the mounting screw. Insert the tabs of the grill into the frame and slide it to the right. Shut the oven door and then secure the grill with the screws. Plug the power cord back in and the microwave should now work." I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
December 12, 2022
bottom hold of door handle has broken off. it is attached only by top of handle, it there a part that I can reattach bottom of door handle ?
Thanks
For model number microwave LMV1683ST
Hello Jim, thank you for getting in touch. According to our research, if the handle hold is broken, you may need to replace the parts assembly, part number PS7788764. It holds the door handle. Please reach out to customer service if you need help placing an order. Glad to be of help!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3519053
Manufacturer Part Number: 3501W1A019D
Manufacturer Part Number: 3501W1A019D
Brand
Model Number
Description
Back to Top
Holder Assembly,Locker
$
30.99
Special Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.