LG/LG_Thumb/174286-3.gif
See part 4001 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Holder Assembly,Locker

★★★★★
★★★★★
7 Reviews

Rated by 4 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 80039!
 Fits your 80039!
PartSelect Number PS3519053
Manufacturer Part Number 3501W1A019D
Manufactured by LG
You May Also Need?
Troubleshooting
This part fixes the following symptoms:
No heat | Won’t turn on
This part works with the following products:
Microwave, Microwave Oven Combo, Range.
This part works with the following products:
LG, Kenmore, Amana.
Part# 3501W1A019D replaces these:
AP4436481
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

3 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Apryl
April 23, 2019
The microwave comes on when we open the door (but still works when door is shut). It looks like this part comes with all 3 switches (and i gather that the likely reason we have the problem is that one of the switches is not functioning properly?). If i were to get this part, how easy is it to install? The 2 "instructions" just say that it is "very easy" but don't indicate how actually to do the installation.
For model number LMVM2075SW
Hi Apryl, Thank you for your question. The switches do come with the locker holder assembly. We do not have the exact specifications on installing this part, but here are some instructions on installing a microwave switch, that may help you with this. "Before you begin any repair please unplug the appliance from the electrical outlet. Use a Phillips head screw driver to unthread the screws securing the grill. With the screws removed, open the microwave oven door then the slide the grill to the left and lift it up to remove. Next remove the control panel mounting screw then lift the control panel up to detach. Then remove the screw holding the inner access panel and then release the panel from the retaining clips. Now remove the screws holding the switch assembly. Depress the release tab and the actuator to detach the switch you are replacing. Disconnect the wire connector to fully release the old switch. Install the new door switch by first connecting the wire connector. Now position the new switch in the assembly snap it into place. Realign the switch assembly on the frame and secure it with the screws. Reinstall the inner access panel securing it with the screw. Now insert the control panel tabs to the slots in the frame and push the panel down. Secure it with the mounting screw. Insert the tabs of the grill into the frame and slide it to the right. Shut the oven door and then secure the grill with the screws. Plug the power cord back in and the microwave should now work." I hope this helps. Thank you and have a great day!

4 people found this helpful.

Was this helpful?
Thank you for voting!
John
June 15, 2022
how do the connectors come off the switches in order to measure the switch with an multi meter
For model number lmv1813st
Hello John, thank you for your question. We have a video that may be of some assistance. The switches are PS3522738 Switch is PS3529293.If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
play video

Was this helpful?
Thank you for voting!
Related Parts:
Jim
December 12, 2022
bottom hold of door handle has broken off. it is attached only by top of handle, it there a part that I can reattach bottom of door handle ? Thanks
For model number microwave LMV1683ST
Hello Jim, thank you for getting in touch. According to our research, if the handle hold is broken, you may need to replace the parts assembly, part number PS7788764. It holds the door handle. Please reach out to customer service if you need help placing an order. Glad to be of help!

Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
 Average Repair Rating: 3.8 / 5.0, 4 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
would not start.
diagnosed defective 'door-shut switch' in the switch holder assembly. rather than replace switch, replaced entire locker holder assembly which made for a very simple and easy repair...not to mention very inexpensive.
  • James from VIRGINIA BCH, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the switches in a component that door activates when shut.
I replaced the whole component with all three switches in it even though only one switch was bad . Taking out one switch out of the holder unit would probably have damaged the unit that was holding the switches. Easy install and it works great again .
  • Jimmy from OZARK, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave not heating, everything else works
Not knowing which of the switches to replace I ordered all three in the assembly. Replacing the full assembly was easy, first unplug the microwave. Then remove the top cover to access the screws that hold the control panel in place and let the control panel hang. There are two screws that hold the assembly in place - remove those. I used needle nose pliers to pull the wires off of the switches and immediately put the wires on to the new assembly so there was no confusion on what wire went where. Place the assembly back in position, replace the two screws to hold it in, put control panel in place and secure screws. Replace top cover and plug in.
  • Barbara from Philadelphia, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
food does not get hot, carousel did not turn, all other indicators worked
Read the troubleshooting section on this site. Figured it was an interlock problem because the food was not getting hot (magentron not turning on) and the carousel was not turning. Did not think both the carousel motor and magnetron failed at same time, thus indicated an interlock problem. The interlock switches are actuated by the door latch. Replaced the assembly locker piece with all three switches (only a $20 dollar part) and microwave was fully operational again. Wife and kids think I am a hero.
  • John from SEVERN, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
4.6
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    1
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3519053
Manufacturer Part Number: 3501W1A019D
Brand
Model Number
Description
Kenmore
72180022700
Microwave
Kenmore
72180029700
Microwave
Kenmore
72180032700
Microwave
Kenmore
72180033700
Microwave
Kenmore
72180039700
Microwave
Kenmore
72180042700
Microwave Oven Combo
Kenmore
72180043700
Microwave
Kenmore
72180044700
Microwave Oven Combo
Kenmore
72180049700
Microwave Oven Combo
Kenmore
72180402402
Microwave
Kenmore
72180403402
Microwave
Kenmore
72180404402
Microwave
Kenmore
72180412500
Microwave
Kenmore
72180413500
Microwave
Kenmore
72180414500
Microwave
Kenmore
72180419500
Microwave
Kenmore
72180522500
Microwave
Kenmore
72180523500
Microwave
Kenmore
72180524500
Microwave
Kenmore
72180529500
Microwave
Kenmore
72180593401
Microwave
Kenmore
72180593402
Microwave
Kenmore
72180594200
Microwave
Kenmore
72180594401
Microwave - Kenmore Microwave Model 721.80594401 (72180594401, 721 80594401) Parts
Kenmore
72180599200
Microwave
Kenmore
72180833500
Microwave - Kenmore Microwave Model 721.80833500 (72180833500, 721 80833500) Parts
Kenmore
72181043700
Microwave
Kenmore
72181622600
Microwave
Kenmore
72181623600
Microwave
Kenmore
72181629600
Microwave

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service