Spark Ignition Switches with Wire Harness

Hi Joe, thank you for your question. There are a couple of parts to check in this case. First you should check your burner electrode. Then you should take a look at your igniter switches/harness. If those parts are fine then you may have to look into your spark module being the issue. I hope that helps. Good luck with your repair.

Hello Steven, Thank you for the question. The next part we suggest testing or replacing is the Switches. We hope this helps.

Hello Jeffrey, Thank you for the question. This could be an issue with the Spark Ignition Switches with Wire Harness or the Spark Module. Both parts can be tested for continuity and check for any loose wires. We hope this helps!

Hello Danny, Thank you for your inquiry. We would recommend checking the spark ignition switches with wire harness, the spark module, and the spark igniters in the orifice holders. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!