This main top assembly is located on top of your range/oven to protect and house the burners. The main top also acts as a stable surface for cookware and cooking dishes. If your main top has lost balance and stability or you have observed discoloration, replacing this part could solve the problem. Remember to allow your range to cool down before starting this installation project. Refer to the manual provided by the manufacturer for installation instructions and accurate guidance.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range.
Part# 316531948 replaces these:
AP4568435
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Elsa
February 26, 2020
Will Frigidaire part number 3409033 fit a Kenmore model number 790.92803015?
For model number 790.92803015
Hello Elsa, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3409041. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. PartSelect Number PS3409033 is not showing to be compatible. We hope this helps.
Is there a video guide for removing and replacing the main top.
For model number 316531948 main top
Hello Richard, Thank you for your inquiry. We do not have a repair video for this part as of yet, but I was able to find the following instructions for you. The front of the cooktop can be lifted by removing the two screws that secure it to the range chassis. To remove the main top on smooth top ranges: 1. Disconnect power from the range. 2. Remove the back panel from the back guard. 3. Open the oven door and remove the two phillips screws holding the main top to the front frame and raise the main top. 4. Remove the fill strip from the front edge of the main. 5. Remove the screw from the ends of the element support bar and allow the element to drop down. top by removing three screws.6. Remove the four hinge screws, lift up on the front of the main top and pull forward. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
