Ask our experts a question about this part and we'll get back to you as soon as possible!
11 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Katelyn
July 13, 2021
Is this piece needed? A hook that kept it along the back wall of the freezer broke, and it doesn’t appear to be much more than a piece of plastic that just hangs. What happens if I don’t put it back into the freezer? I took it out after the hook/tab plastic broke off, and the freezer seems to be working fine
Hello Katelyn, Thank you for the question. This Air Duct channels the air through the freezer cavity for proper Air Flow and is required. We hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Laurine
December 9, 2021
How do I get the duct air back in my freezer? No way possible?
For model number E123BC30KS4A
Hi Laurine,
Thank you for your question. When installing this part, angle the top of the duct-air, so that the tabs can be inserted into the back cover. Then snap it into place. We hope this helps! If you have any questions, please let us know.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Laurie
October 27, 2017
This part became lose and we haven’t been able to get it back in freezer.
For model number fghg2366pf0
Hi Laurie,
Thank you for your question. This part just snaps into place on the back wall of your freezer. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jerry
April 16, 2018
How do I remove the ice maker to replace the back duct panel on this model lghn2844mf0. Its been off for awhile and bottom of the freezer keeps building ice up all the time. Thank you
For model number LGHN2844ME0
Hi Jerry, Thank you for the question.The air duct will need to be removed to unplug the ice maker wire harness. To remove the ice maker air duct you will need to first you will need to unplug the appliance. Remove the freezer door and freezer section baskets and shelves. Remove the screw from air duct and remove the air duct from unit. To remove the ice maker, disconnect icemaker from wire harness plug. remove the one screw at the front of mounting plate. The icemaker will then slide forward to allow the shoulder screws in the liner to pass through the keyhole slots in the mounting plate. The mounting plate is removed from the icemaker by removing the three screws from the bottom of the assembly. Reverse the steps to reinstall and allow 24 hours for the ice maker to operate, then dispose of the ice cubes. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Matthew
January 3, 2023
It appears the vent deflector on my model refrigerator/freezer doesn't "snap" into place (as described elsewhere), but rather just hooks into the ventilation grill at the back of the freezer and dangles there. Is this assessment correct?
For model number LFHB2751TF0
Hi Matthew,
Thank you for your question. The clips on the air duct should slide into place. Once you have done this, push it in and it will lock. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Liz
February 1, 2024
Air vent cover on back panel of freezer slipped out whilst cleaning. Unable to reinsert. Very difficult angle as Ice maker seems to block it and also (not being funny) we have short arms and can’t maneuver it. Is there a diagram available? Thanks.
For model number FGHG2366PF7a
Hi Liz, thank you for your inquiry. We have attached the link to the relevant diagram, which might help while reinserting the freezer air duct cover. We hope that helps!
Hello Laureen, thank you for your question. This part just snaps into place on the back wall of your freezer. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Jeff
December 8, 2022
Exactly where do the two tabs hook to the back wall of the freezer? Do the two tabs fit on top or on the bottom of the back wall. I can't find notches for the tabs either top or bottom.
For model number Fghf2366fba
Hello Jeff, thank you for getting in touch. The notches for the tabs to snap the air duct lie at the bottom of the freezer's back wall. We hope this information helps!
Was this helpful?
Thank you for voting!
EUGENE
June 26, 2023
HOW DO YOU REPLACE THE FREEZER AIR DUCT?
For model number LGHD2369TF8
Hello Eugene, thank you for reaching out. You would need to remove the baskets and shelves in the freezer. Remove the screw from the air duct, lift it up on the bottom of the duct, and then it will allow you to pull it forward. This part just snaps into place on the back wall of your freezer. The notches for the tabs to snap the air duct lie at the bottom of the freezer's back wall. When installing this part, angle the top of the duct so that the tabs can be inserted into the back cover. Then snap it into place. We hope this information is useful!
Was this helpful?
Thank you for voting!
Bob
August 26, 2023
The freezer panel fell off when cleaning, we also can't figure out how to reinstall it in the back of the freezer, we see no slots for the tabs to go into, a picture would be great
For model number Electrolux EI23BC30KS3
Hello Bob, thank you for getting in touch. The part number of the access panel is PS1526583. The part number of the screws for the access panel is PS1525784. Unfortunately, we do not have a picture of the installation but can guide you on how to install it. Place the bottom edge of the access panel inside the base of the refrigerator. Now secure it with the screws. We hope this sorts out your problem!
