Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tomasz Wiszniewski
February 6, 2018
Water tube replacement. Freezer door.Trim recess fz ps302056 how is mounted?
is it bolted from the inside of the door or pups out?
i want to have access to the hose?
For model number TFXW27FMA
Hello Tomasz, thank you for your question. If there are no screws holding it into placed, you can look up at the bottom of the trim recess part, and you should see a couple of indentations. If you take a flat head screw driver and depress the tabs in those indentations the front trim should pop off. Its should held into place by tabs. Good luck with your repair!
Was this helpful?
Thank you for voting!
Tomasz
February 6, 2018
Freezer door water tube replacement .Dispenser trim recess is mounted on seven pop off pins (sides & bottom). On top it is mounted with two different type of latches/tabs. How to disengage the latches/tabs. They do not want to pop off. I broke one already and can see that is different from other seven pins.
For model number TFXW27FMA
Hi Tomasz, Thank you for the question. You should be able to depress the tabs with a small screw driver. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.