This part helps protect the motor from overheating.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WR08X10015 replaces these:
AP3656083, 824501, WR08X10044, WR8X10015
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
February 7, 2019
I know that my problem could be a capas=capacitor or start relay protector but why did it go out compressor getting hot?
For model number GTH18EB
Hello, Thank you for contacting us. Make sure after unplugging your capacitor you release any electrical charge. You can do this with a screwdriver that has an insulated handle. When testing your capacitor set your meter to 1000 ohms. Touch your probes to the terminals on the part. If your meter stays on 0 then your capacitor needs to be replaced. For your start relay, set your meter to the lowest setting and calibrate it to 0. Your relay should be reading anywhere between 10 - 100 ohms. If it does not, then it is likely broken and needs to be replace.
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
