271335-1-M-GE-WH23X10015 -Drain Pump
Part Location Diagram of WH23X10015 GE Drain Pump
See part 655 in the diagram
( Grid squares measure 1x1 inch )
271335-1-S-GE-WH23X10015 -Drain Pump 271335-2-S-GE-WH23X10015 -Drain Pump 271335-3-S-GE-WH23X10015 -Drain Pump Part Location Diagram of WH23X10015 GE Drain Pump
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Drain Pump WH23X10015

 Fits your WBSR3000F0WS Washer!

Rated by 1 customer 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 268.07
  Special Order
Get FREE EconoShip on orders over $100! T&C apply
 Fits your WBSR3000F0WS Washer!
PartSelect Number PS271335
Manufacturer Part Number WH23X10015
Manufactured by GE
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
General Electric.
Part# WH23X10015 replaces these:
AP3156256, 947780
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Had a water leak that appeared to come from underneath the washer
I decided without see exactly where the water was coming from to replace the pump and all the drain or inlet hoses, connectors, whatever carried water due to the age of the machine, almost 17 years old. I also decide to change the tub seal.
1. unplug
2. disconnect water supply
3. remove back of washer
4. laid washer on its front on a rug
5. removed the drain and filler hoses (3) different hoses and all new clamps
6. closed up everything, hooked up everything ran short cycle

WHEN THE PUMP STARTED SO DID THE WATER POURING OUT FROM UNDER THE WASHER, MORE THAN BEFORE I CHANGED OUT THE PARTS

I decided the tub seal was leaking. It was a logical decision and it was the last part that carried water that I didn't change.
1. remove front panel
2. remove top panel
3. remove electrical connection inside pane and remove entire top panel
4. remove agitator and agitator cup
5. remove top ring that hold inner liner
6. here is the problem, a special tool is required to remove the tub seal nut or a 1-11/16" socket that I didn't have
7. tried a new pipe wrench and rust buster taking care that the nut is soft metal
8. decided to purchase the correct tool(socket) and put everything back together to do two weeks worth of laundry
I left the front panel off to pinpoint where the water leaks was and when the pump started there was no leak in the washer. However, water was pouring across the floor.
I found that the house drain pipe was cracked on the top and back. This was on the outlet side of the trap. I would have never suspected the drain (PVC) with no stress or load on it to crack across the top of the pipe.
So anyway, $240 later for washer parts and $6.47 for a new piece of PVC I no longer have a problem, wrong!
Started a load of laundry and the washer will only fill for a small load.
1. Removed the front panel
2. removed the tube to the fill switch thinking there was water in it that's making the switch think its full when its not, NO WATER.
3. Shot air in the tube and made sure the switch clicked audibly
4 Started the washer with the fill switch tube off and waited for waited for water to start flowing out and then hooked up the tube and it shut off the water with a full load. Everything worked.
Tub seal still not changed but no leaks.
Read less
  • MARK from GROVE CITY, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS271335
Manufacturer Part Number: WH23X10015
Brand
Model Number
Description
General Electric
WBSE2090A0AA
Washer
General Electric
WBSE2090A0WW
Washer
General Electric
WBSE7003A0WW
Washer
General Electric
WBSR3000F0WS
Washer
General Electric
WBXE2070A0AA
Washer
General Electric
WBXE2070A0WW
Washer
General Electric
WNCD2050A0WC
Washer
General Electric
WNSE5699A0AA
Washer
General Electric
WNSE5699A0WW
Washer
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Drain Pump
$ 268.07
  Special Order
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.