D-Shaped Knob Clip WH01X10106 | Official GE Part | Fast Shipping | PartSelect
We’re open and continuing to ship packages, however we are experiencing shipping delays. Call volumes are high, please use our self-serve options to cancel or return your order. Learn about our response to COVID-19
D-Shaped Knob Clip – Part Number: WH01X10106
D-Shaped Knob Clip – Part Number: WH01X10106 D-Shaped Knob Clip – Part Number: WH01X10106 https://partselectcom.azureedge.net/Schematics/GE/00005070i01.gif

D-Shaped Knob Clip

PartSelect Number PS268493

Manufacturer Part Number WH01X10106

Manufactured by GE

Product Description

D-Shaped Knob Clip Specifications

Sold individually.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Timer will not advance | Will Not Start | Will not shut off | Shuts off too soon

This part works with the following products:

Dryer, Washer, Dishwasher.

This part works with the following brands:

General Electric, Hotpoint, Kenmore, RCA.

Part # WH01X10106 replaces these:

912208, AP3425457, WE00X0037, WE00X37, WE01X0980, WE1X980, WH1X10106.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 24 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Jeffery from Waterford, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WE04X20415, WE1M654, WH01X10106
Timer knob cracked twice. Found out the timer switch was bad.
Removed the 3 knobs. They just pull off. Removed 6 screws on the back side of the control panel. The front (plastic panel then just separates from the back). Then look at how the switch is mounted on the plastic panel. There should be 2 small pieces of plastic that holds it in. Carefully twist the switch in the appropriate direction so it comes free. Before you remove any wires from the old switch remember what colors go where ! I used needle nose pliers to remove the connections from the switch. Make the new connections, mount the switch, put the screws back in the panel. BEFORE YOU DO ANYTHING. UNPLUG THE ELECTRICAL CORD !!!
712 of 757 people found this instruction helpful.
Was this instruction helpful to you?
Whitney from Vancouver, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WE4M533, WE1M654, WH01X10106
START knob and plastic underneath broken
It was so incredibly simple! The site made it foolproof to find the right parts - and the actual replacement job itself was easier than we ever could have imagined. Background: I love to do laundry - I mean A LOT! So - I use the washer and dryer every night to wash the familie's clothing and blankets and towels. After heavy use - the outer knob stripped out. We threw it away and were using pliers to turn the small plastic knob underneath. After a few months - that plastic wore down and we could not turn it on at all!
336 of 454 people found this instruction helpful.
Was this instruction helpful to you?
Edwin from Seattle, WA
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set
Parts Used:
WE12M29, WE18X25100, WH1X2721, WE25M40, WH01X10106
Dryer making grinding noises
We live in a Condominium, space is tight especially in the Utility room where the washer/dryer are located. Turned dryer breaker off at the electical panel.
Removed the top cover and front assembly w/door and front drum support, right where the unit was located. Had to gain rear access to loosen drum drive belt so undid the dryer vent hose to floor connection through a front acess hole. Moved the unit out to the breakfast nook as well as disconnecting the power cable from the wall socket. Removed the rear access panel covers and unhooked the drive belt. At the front removed the top screws off the lower cross member to allow spreading of the side covers to allow the removal of the drum. Removed drum and found the bearing bushing gone, reduced to powder.
Using the supplied instuction sheet, replaced the rear bearing assembly, replaced the drum after vacumming the whole interior and started the reassembly of the unit using the new belt and moved the unit back into place. Reconnected the power cable and dryer vent then lastly replaced the lint filter and selector knob. Closed the breaker and turned on the machine, no noise!!!
Incidently I am 78 years old. Thanks PartSelect.
258 of 395 people found this instruction helpful.
Was this instruction helpful to you?
Douglas from Santa Barbara, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WE4M519, WE1M654, WH01X10106
All the control knobs broke
I took apart the top of the dryer and removed the switch and replaced it with the new one. I also removed the knobs and replaced them. Easy
113 of 197 people found this instruction helpful.
Was this instruction helpful to you?
Josephine from Chevak, AK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
WH12X10065, WH01X10142, WH01X10106
it would over flow with water
First I removed the 4 screws that held the element in place. I pulled it out, and than I decided to check on the hose that was attached to the water level pressure switch, so I opened the front of the washer and sure enough, all I had to do was clean the hose attached to the water sensor, and as it turned out, I really did not need to change the water sensor, but at least I have a water level pressure switch, water sensor just in case I really do need to change it.
59 of 78 people found this instruction helpful.
Was this instruction helpful to you?
Richard P. from Bensalem, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WE04X20415, WE1M654, WH01X10106
The timer switch on our dryer
The person on the phone was so helpful in locating the exact timer needed. We received the prt 3 days later and it was so easy to install. I would highly recommend this company. A local shop wanted to charge 3x more then what we paid.
22 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Charles F from Kirkville, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WH01X10462, WH01X10106
Could not adjust timer/switch
I had immediately assumed the problem was the timer/switch, P/N WE4M365 and foolishly ordered that part. Should you ever encounter non-adjustment of the timer/switch, try another knob from the console. That was the only problem here as it turns out. Also, the knob DOES come with the "D" shaped insert clip.
20 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Kimberly from Valencia, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WH01X10106, WE1X1266
I needed to replace the Timer Knob on my dryer
I took the old one off and the new one went right onto the dryer. It was very simple to do.
20 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thomas from Webster, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
WH01X10462, WE04X20416, WH01X10106
Timer bound up, causing the knob to break.
Disassembled back splash to inspect timer. Ordered parts (at a 50% discount from brick and mortar stores). Parts delivered in two days. Installed new timer and had everything back together in 10 minutes. No-brainer!
18 of 31 people found this instruction helpful.
Was this instruction helpful to you?
William from Islip Terrace, NY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WH1X2721, WE4X881, WH01X10106
Start switch and knob busted
Just followed the installation video. The only issue with the video was that a phillips screwdriver was specified and I actually needed a torx screwdriver.
15 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
24 Reviews
4.1
out of 5
Filter By Rating:
  • 5 Stars
    15
  • 4 Stars
    4
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Stars
    4
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS268493
Manufacturer Part Number: WH01X10106
Brand
Model Number
Description
General Electric
57731H0WW
Washer
General Electric
57731H2WW
Washer
General Electric
57731H3WW
Washer
General Electric
57731H5WW
Washer
General Electric
57731H6WW
Washer
General Electric
57731H7WW
Washer
General Electric
57731H8WW
Washer
General Electric
57731H9WW
Washer
General Electric
DPSR610EG0WT
Dryer - Electric
General Electric
DPSR610EG1WT
Dryer
General Electric
DPSR610EG2WT
Dryer
General Electric
DPSR610EG3WT
Dryer
General Electric
DPSR610EG4WT
Dryer
General Electric
DPSR610EG5WT
Dryer
General Electric
DPSR610EG6WT
Dryer
General Electric
DPSR610EG7WT
Dryer
General Electric
DPSR610EG8WT
Dryer
General Electric
DPSR610GG0WT
Dryer - Gas
General Electric
DPSR610GG1WT
Dryer
General Electric
DPSR610GG2WT
Dryer
General Electric
DPSR610GG3WT
Dryer
General Electric
DPSR610GG4WT
Dryer
General Electric
DPSR610GG5WT
Dryer
General Electric
DPSR610GG6WT
Dryer
General Electric
DPSR610GG8WT
Dryer
General Electric
DPSR610GG9WT
Dryer
General Electric
EJRR4170E1WW
Washer
General Electric
EWA3000B0WW
Washer
General Electric
EWA3000B1WW
Washer
General Electric
EWA3000B2WW
Washer