This one-time use safety thermostat has a limit of 325 degrees Fahrenheit. One this thermostat trips, you will have to replace it.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
General Electric, Hotpoint, RCA.
Part# WE4X800 replaces these:
AP2619437, 2285, WE04X0730, WE04X0800, WE4X730
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Aletha
February 7, 2018
My dryer runs but there is absolutely no heat. There are no blockages in the vent. What is the part I should be looking at? Thermostat?
For model number DDE7200SBLWW
Hi Aletha, Thank you for the question. There are a few parts you will need to test with a Multimeter to determine the defective part. First I suggest the three thermostats on the Element housing, Part Number: PS268245,PS268250 and PS268083. If they are all testing good then you will need to test the element its self and the two thermostats on the front of the appliance, Part Number: PS268248 and Part Number: PS268249. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
January 7, 2018
Dryer vent was blocked . I have no heat but dryer still runs. Which fuse or thermal regulator do i need?
For model number dcvh680ejoww
Hello Mike, Thank you for your inquiry. I would check both the safety thermostat and the high limit thermostat. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tony
November 20, 2018
Dryer got hot works some time sometimes not there is still a lot of lint on the front were heating element is cant get to it what part should i.Change it comes on some then goes back off
For model number DBL3600SBLWH
Hello Tony, Thank you for the question. If you have a lot of Lint, I suggest cleaning out the lint ducks and opening up the cabinet of the dryer and cleaning it out. You may also need to clean out the exhaust pipe. With lint build up it can block air flow and cause it to over heat. Hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
