This orifice spud changes the burner from liquid propane (LP) to natural gas. This orifice is sold individually. Size: 1.50MM
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB28K10022 replaces these:
AP2026910, 255886
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Laura
March 27, 2018
This stove was converted to propane and now needs to be converted back to natural gas. I have the parts for 3 of the burners so i need one more for burner and one for oven. Can you tell me what i need?
For model number JGBP28BEA4WH
Hi Laura,
Thank you for your question. This orifice is for all of your burners according to your model information. To change the orifice in your oven, you would need to switch the direction of the orifice inside of your regulator. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Craig
November 20, 2019
I just bought this stove and it was using propane. I'd like to convert it back to natural gas. What is the correct orifice # to use. Are there 3 different sizes, two small top burners, three large top burners, and the oven?
For model number JGB296DET3WW
Hi Craig, thank you for your question. You will have to replace all of your burner tubes. Here is the list: PS3417658, PS3510841, PS3510843, PS3417657, PS3510844. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Aylie
January 21, 2020
Hi,
We would like to convert our range to natural gas. We have been using propane, but now are switching to natural gas. Please share with me all of the parts i would need to order.Thank you,
aylie
For model number jgb805sep1ss
Hello Aylie, thank you for your question. To switch back to natural gas, the orifice and burner tubes will have to be replaced. Those numbers are ORIFICE HOLDER LF Part #: PS2370242, ORIFICE HOLDER Liner OR lower Part #: PS2370244, ORIFICE HOLDER Assembly Part #: PS2370243, ORIFICE HOLDER RR Part #: PS1481271. The oven can be changed over by adjusting the oven valve. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Pete
January 6, 2020
I need to convert this stove to natural gas from lp. What parts do i need for the burners and oven. Does the gas regulator need replacing also ?
For model number JGBS180ET1WW
Good Day Pete. Thank you for your question in regards to your unit (Model Number JGBS180ET1WW). The model number you provided is not recognized. Please verify the number you provided us. If it is correct, we recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part! Best Regards.
Was this helpful?
Thank you for voting!
Pete
January 6, 2020
I need to convert this stove to natural gas from lp. What parts do i need for the burners and oven. Does the gas regulator need replacing also ?
For model number JGBS18DET1WW
Hello Pete and thank you for writing.
You would need one orifice spud LP PS240683 for each of your burners, you need a new regulator and possibly a new orifice for your oven. You should check your manual as some models do not require the oven to be converted. We hope this helps. Please contact us anytime if you require further assistance.
I bought a used 2015 GE stove that the previous owner converted to lp. I need to convert it back to natural gas. I'm looking for orifice spuds for all the stove top burners (GE instructions show 9 of them and each one is a different size). I also need orifices for the upper and lower ovens (GE shows 3 of them and again all different sizes). I do have a chart that lists all of the orifices by size.
For model number PGS950SEFSS
Hi John,
Thank you for your question. You will need to replace the orifice tube holders for the surface burners. The part number for the right left orifice holder is PS8754823. The part number for the front right orifice holder is PS8754820. The part number for the right rear orifice holder is PS8754821. The part number for the center orifice holder is PS8754833. For adjusting the oven back to natural gas, you will need to consult your owner's manual for information. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Robert
November 6, 2019
I have a GE model stove, model above. I need the lp orifices for the oven and the broiler. I cannot find the parts number on the stove diagram or on the GE website. I do not need the range lp orifices. I only need the lp orifices for the oven and broiler.
For model number JGB3001ER3SS
Hello Robert, thank you for your question. The cooktop conversion kit which includes the 4 top burner orifices is WB28K10613. The oven regulator part number WB19K10041 can be adjusted to either LP or NAT gas but changing the valve on the part itself, there is no orifice needed. I hope this helps
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
