Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jason L - January 10, 2020
Verified Purchase
Easy repair
Back to normal
★★★★★
★★★★★
Charles H P - December 31, 2018
Verified Purchase
Never got delivered
Never got the part , somehow there was a mixup on the proper shipping address, my address is Kissimmee, Fla. , the part went to New Jersey instead , still waiting for this matter to be resolved
January 2, 2019
Hello,
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!
★★★★★
★★★★★
Brett B - October 22, 2018
Verified Purchase
nice to have
great service.
★★★★★
★★★★★
Ruben S - May 23, 2018
Verified Purchase
The traveling lens sheild
While tracking the part that was shipped out of southern Illinois I noticed that it went on to visit Iowa, Wyoming, and California. I live in Chicago roughly 150 miles from the shipping source and to this day I have NOT received the part. Customer service stated that it was because I chose the cheapest shipping option....Hello, its only a $12 part and the repair is not critical where I need next day shipping, two weeks later I can honestly say the repair is NOT going well!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
February 7, 2018
First thank you for your reply to my previous question - much appreciated. Can you tell me the name and number of the part which supports the lower 'light lens shield' (ps2354534) on the above model refrigerator?
For model number GSH25JSXNSS
Hi William, Thank you for the question. The Light Lens is not held by a support. There are tabs on the lens its self that holds it in place. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Pamela
September 14, 2017
I just asked a question about how to install the lower light shield in the GE refrigerator. They responded indicated that this was a different part. The part number is wr17x12486. This part is a shield that covers the lower light bulb. I'm not understanding what the shield hooks on to. Please help.
For model number GSH25JSBBSS
Hi Pamela,
Thank you for contacting us back. Before beginning any repair, please unplug the refrigerator from the electrical outlet. First, open the refrigerator door. The lower light shield is located at the rear of the refrigerator compartment. To remove it simply lift up on the shield and remove it. The light shield mounts on 2 pins located at the rear of the refrigerator. Press it down onto the 2 mounting tabs. Once installed close the refrigerator door and plug the refrigerator back in. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Brigitte
January 10, 2018
The light cover in the lower rear part of the refrigerator, model gse25thbcc has melted and needs replacement. However.. while looking at this i do not understand how a new cover would be held properly in place (the old one apparently did not have anything to hold it in place...)there is nothing to fasten any replacement cover to and it seems that the cover would therefore touch the light bulb one again and subsequently melt.
For model number GSE25ETHBCC
Hi Brigitte, Thank you for the question.It looks like the cover is held in place just by pressure.The old cover may have been bumped out of place. Hope this helps!
Was this helpful?
Thank you for voting!
Jeff
March 4, 2019
I have the same question as everybody else concerning the lower light cover mount. When i noticed ours melted, i also noticed it was held on by tape. Is this the way it is supposed to mounted, or does it tie in with the drawer somehow?
For model number GSH25JGDDWW
Hello Jeff, thank you for your question. There are no clips it stays in place by pressure.You have to almost squeeze the lens and place into the grooves around your light. There may have been tape originally from the factory but the lens is not held into place with tape. I hope this helps.
Was this helpful?
Thank you for voting!
Joe
May 23, 2019
Is there a manual or video of how the #259 light lens shield is to be replaced?
For model number GSE25ETHCWW
Hi Joe, Thank you for contacting us back. Before beginning any repair, please unplug the refrigerator from the electrical outlet. First, open the refrigerator door. The lower light shield is located at the rear of the refrigerator compartment. To remove it simply lift up on the shield and remove it. The light shield mounts on 2 pins located at the rear of the refrigerator. Press it down onto the 2 mounting tabs. Once installed close the refrigerator door and plug the refrigerator back in. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Lynda
November 4, 2022
The lower light shield in my refrigerator melted in the spot that covers the light bulb. It was attached by a piece of tape to the back of the fridge. There is nothing to hold it up. I read the Q and A entries about this problem, and one said there should be 2 pins on the back of the fridge to attach the light shield to, which I don't have. Another said that it stays up by pressure or something which makes no sense. Does anyone have a workable solution for this?
For model number GSH25JGDCBB
Hi Lynda,
Thank you for your question. The shield is inserted into grooves on the refrigerator wall. You have to bend the light shield slightly to insert it into the channels, so it is securely fastened. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Lori
June 27, 2023
My question is about the main light bulb on the top, center. The socket and bulb are working just fine. The problem is holding it firmly in place. There is some sort of "sling" holding it when I moved in to this apt, and I've since tried taping it together. I'm guessing the sling was a contraption someone threw together. Is there such a part? I've tried reseating the socket to no avail. Any ideas?
For model number GTS18GTHFRWW
Hi Lori, thank you for asking. We have found that the light socket is attached to the control housing through clips. If these clips are damaged, the socket may not stay in its position. You may need to replace the socket, part number PS299782, to fix the issue. Good luck with this repair!
