The ejector drive gear is a part for your refrigerator. This icemaker drive gear is for the ejector blades. The part rotates the cube ejector arm, which cycles the icemaker and pushes the cubes out and into the ice bucket, ready for the ice to be used. The outside diameter of this piece is almost two inches by two inches. The reason for needing to replace your gear is if the current one is broken/missing a tooth, or if your icemaker is not dispensing ice and is noisy.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator Drive Gear
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Ice maker won’t dispense ice
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Joe W - December 1, 2020
Verified Purchase
Great service
Easy fix.
★★★★★
★★★★★
Michael W - January 30, 2020
Verified Purchase
Ice maker
Part was perfect
★★★★★
★★★★★
Amy R - July 23, 2019
Verified Purchase
Works perfect
Fast shipping and a great price!
★★★★★
★★★★★
Michael W - April 25, 2019
Verified Purchase
So far so goog
Its working great so far
★★★★★
★★★★★
Michael W - November 12, 2018
Verified Purchase
Ice maker
Small gear drive delivered quickly easy ordering process
★★★★★
★★★★★
Angela K - July 20, 2018
Verified Purchase
Easy repair
This part was just what we needed, website helped to figure out, easy repair..
★★★★★
★★★★★
Haydn M - May 18, 2018
Verified Purchase
Just what I needed
All is well. Easy installation. Off andvrunning.
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
RINER
August 1, 2018
My ice maker has a tooth missing on the small gear which does not allow it to cycle where do i get one i see the large one but not the small one any help greatly appreciated thanks riner b wade
For model number frs6lf7fmb
Hello Riner, Thank you for the question. Checking the model number, the small gear was sold as part of the drive motor. The manufacture no longer sells the motor on its own and only make and sell it as part of the Ice Maker, PartSelect #: PS12364147. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Chuck
April 7, 2018
Makes ice but they sit on the top of the ice maker and don't dispense into the bucket?
For model number LGHN2844MF5
Hello Chuck, Thank you for your inquiry. Check the ice stripper and bail arm to see if they move freely. Examine the bail arm support to make sure it is not cracked. Next test the ice maker itself by taking it out and seeing if you can simulate a harvest cycle. We have included a link to one of our articles that mentions on how to test the ice maker assembly and module, just scroll down to the section on the ice maker assembly. Hope this helps!
https://www.partselect.com/Repair/Refrigerator/Not-Making-Ice/
4 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
June 30, 2021
Replacement gear: Does the new gear need to be timed when replaced on the shaft? I rotated the shaft after removing the old gear and am not sure if I got it back in exactly the same position as before. Thanks!
Hello Dave, Thank you for the question. We suggest watching the How To Video with Steve for instillation instructions. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Candace
February 9, 2022
My auger that won’t let the ice go through because that white round thing that the blade goes round and round is broke what do I do
Hello Candace, thank you for contacting us. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
