2345608-1-M-GE-WB21K10100-VALVE BURNER 270
Part Location Diagram of WB21K10100 GE VALVE BURNER 270
See part 56 in the diagram
( Grid squares measure 1x1 inch )
2345608-1-S-GE-WB21K10100-VALVE BURNER 270 2345608-2-S-GE-WB21K10100-VALVE BURNER 270 Part Location Diagram of WB21K10100 GE VALVE BURNER 270
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

VALVE BURNER 270 WB21K10100

 Fits your JGB280DEN4BB Range!
★★★★★
★★★★★
1 Review

Rated by 1 customer 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 31.46
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your JGB280DEN4BB Range!
PartSelect Number PS2345608
Manufacturer Part Number WB21K10100
Manufactured by GE
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint.
Part# WB21K10100 replaces these:
WB28K10396
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Luis S - December 28, 2018
  Verified Purchase
Great
Well packaged in new condition and delivered on time. Thanks
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.8 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The front left burner would not turn because the burner valve was physically stuck and wouldn't turn.
Start by shutting off the main gas supply to the range and unplugging the electric cord.
You will first need to take the plastic control knobs of from each individual burner (they should slide straight off).
Next, you will need to remove two phillips head screws on the front face of the panel. They are located on the right side of each rear valve burner stem that is sticking out through the panel.
Next, open the oven door, locate and remove the three screws on the bottom of the front face panel. The front panel should now come off exposing the top burner manifold and all of the valve burners.
The next step would be to take the burner grates and each round burner cover off (no tools required). This will expose the top of each individual burner. You will see screws that hold each individual burner down to the stove top. On my stove the heads were all rusted and I could not remove them. If you can remove all four of your burners and disconnect the wire on each ignitor and set the burners aside.
Next, go back to the front of the stove where you took off the panel and you will see two metal clips on each side of the stove top. Push each one of these in with a screwdriver and gently lift up on the stove top. It should hinge up towards the back of the stove and give you full access to the burner valve you need to change.
Next, use a box end wrench (I think it was 1/2") and remove the gas line attached to the burner valve. After the gas line is removed, take out the bolt and clamp that holds the burner valve to the manifold. The old valve should drop out.
Install the new valve making sure the rubber gasket is seated properly, reattach the clamp and bolt and reinstall the burner tube line.
Before you put the range all back together turn the gas back on at the appliance shutoff. Locate the gas orifice for that particular burner and hold your thumb or finger over the hole. Turn on the burner and leak test the burner tube connection and where the valve is clamped into the manifold.
Shut the burner back off if the leak test passes and reassemble the stove.
If your burners won't come out of the stove because the screw heads are rusted off (like mine was), you can carefully lift the lid a couple of inches to gain access to the valve. Make sure you don't bend or kink any of the burner tubes.
Read less
  • Steve from WOODHULL, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Produce Preserver Filter
$21.56
$21.56
  In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.60
$12.60
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.10
$19.10
  In Stock
Affresh Cleaner
$19.10
$19.10
  In Stock
Cooktop Cleaner
$17.76
$17.76
  In Stock
Affresh Ice Machine Cleaner
$20.52
$20.52
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2345608
Manufacturer Part Number: WB21K10100
Brand
Model Number
Description
General Electric
147213
Range
General Electric
147263
Range
General Electric
EGR2000EM1BB
Range - Gas
General Electric
EGR2000EM1CC
Range - Gas
General Electric
EGR2000EM1WW
Range - Gas
General Electric
EGR2000EM2BB
Range
General Electric
EGR2000EM2CC
Range
General Electric
EGR2000EM2WW
Range
General Electric
EGR2000EM3BB
Range
General Electric
EGR2000EM3CC
Range
General Electric
EGR2000EM3WW
Range
General Electric
EGR2000EM4BB
Range
General Electric
EGR2000EM4CC
Range
General Electric
EGR2000EM4WW
Range
General Electric
EGR2001EM1SS
Range - Gas
General Electric
EGR2001EM2SS
Range
General Electric
EGR2001EM3SS
Range
General Electric
EGR2001EN1SS
Range
General Electric
EGR2001EN2SS
Range
General Electric
EGR2001EN3SS
Range
General Electric
EGR2002EM1BS
Range - Gas
General Electric
EGR2002EM2BS
Range
General Electric
EGR2002EM3BS
Range
General Electric
EGR2002EM4BS
Range
General Electric
EGR2002EM5BS
Range
General Electric
EGR3000EP2BB
Range
General Electric
EGR3000EP2WW
Range
General Electric
EGR3001EP2SS
Range
General Electric
JCGBS23DET1BB
Range
General Electric
JCGBS23DET1WW
Range
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
VALVE BURNER 270
$ 31.46
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.