Replacing your Frigidaire Washer Washer Control Board
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Frigidaire, Crosley.
Part# 137006030 replaces these:
AP4358489, 1464808, 134855506
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Edward
April 22, 2018
When start button is pressed a buzzing sound occurs and washer does not work. Door is closed. Would this work?
For model number ATFB6700FS0
Hi Edward,
Thank you for your question. The washer control board is one part to check. You will also need to check the door striker, the door lock and switch assembly, the door hinge with bushings, the shock absorbers, the drain pump and the motor control board. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Qasim
July 6, 2023
The washing machine Model ATF6700FS2 is starting by itself without using it what do I need partwise?
For model number 3172199990
Hi Qasim, thank you for reaching out. Based on the description that you have provided, we would recommend checking the electronic control board, part number PS2338949, as it is the most likely cause of this issue. If this part is faulty, you may need to replace it. We hope this is helpful!
Was this helpful?
Thank you for voting!
Greg
September 21, 2023
Frigidaire front load washer does not go into spin mode every time. This problem is intermittent. When I put it in spin mode it works every time.
For model number atf60001fs1
Hi Greg, thank you for your question! We recommend checking the drain hose and drain pump for clogs. If they are fine, then a broken shock absorber, part number PS3508101, can also prevent a front-load washer from spinning because the control will detect excessive tub vibration when a shock cannot help stabilize the tub. We hope this helps, good luck with this repair!
